Repairs to uPVC Windows
upvc window repairs is a great option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they do not rust or rot.
Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from costly repairs and improve energy efficiency.
1. Broken Glass
If the glass in your window is broken it can cause a great deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to ensure that your windows are in good working order.
Single-pane windows are relatively easy to replace, and they generally fit into frames that were previously in use very easily. If windows with double panes are held together by internal beading, it is more difficult to remove and replace the old panes. In this situation, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.
If you're planning attempt to remove the window panes by yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth before you start working on the glass, so that any shards will fall onto the fabric instead of onto the floor where they can be trampled on and cause further damage.
It's a great idea tape the gap once the glass is removed. This will stop drafts and water from entering your home until a professional is able to fix the window. This will also act as a barrier, preventing any intruders to gain access to your home. If the gap is large, you might be interested in an alarm door that comes with an integrated window as this will offer the best of both worlds.
2. Sagging
uPVC is durable and energy efficient alternative to timber sash window. Over time, they can develop a variety of issues that include sagging. A sagging window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from becoming worse.
Repositioning the hinges could help fix a window that is sagging. To accomplish this, you'll need open the window to get to the frame. After that, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close your window and test it for an appropriate fit. If you're satisfied with the fit, tighten the screws until they remain in position.
If you are unable to reposition the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to lose their tightness. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows are watertight and safe from drafts.
uPVC handles may also loosen. This is often caused by screws that have loosened over time, but it could be due to the handle mechanism wearing out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need to close the window and then perform an experiment fit. The corner joints of the sash must be aligned with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.
3. Water Leaks
If you wake up to wet floors and mouldy walls each time it rains,
uPVC window repairs it is important that you take action. Water leaks from windows can not only cause degrading of the structure of your home but also hamper your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.
This is a relatively easy fix that can be completed by any skilled DIYer. Depending on how severe the issue is, the old caulking may have to be removed. It is essential to keep in mind that when it is about
uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and decrease the efficiency of your energy usage.
Make sure that the drainage holes do not have debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious cases you might have to consider replacing the window.
Mold spots and rotten sills are also signs of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the home.
If the leakage occurs between the
double glazing repair-glazed window, it is more likely the issue is more with the seal than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
Hinges may be to blame if your uPVC window is difficult to open, or if it opens with the breeze. Anyone with the skills to fix them can replace these in a matter of minutes.
Like any mechanical part, hinges can wear out over time. It is essentially a very simple process but it can be simpler when you have a person to help you hold the frame in place.
Check that the uPVC hinges are open and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.
Window hinges that aren't working properly could be caused by improperly opening the window in a certain way or by improper installation in the factory. Sending us a picture through our website can often resolve the problem. We are happy to provide assistance.
It is also crucial to grease the hinges on a regular basis. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the risk of a window getting stuck and stop corrosion. It is recommended to do this at least once a year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.
5. Draughts
Draughts can be caused by several different causes. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause a gap to form where the sash joins the frame. If they are beyond repair, it might be necessary to have them realigned. Secondly the interlock, this is on the hinge side of the window, may also become misaligned, again it is possible to just give them a good clean, but in certain cases, it may be necessary to have these replaced.
These seals can wear down or become damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to prevent draughts. Another option is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and will lessen draughts.
The final method to cut down on draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. They can keep your home warm by blocking out cold air.
Your upvc windows can remain a great source of insulation and security to your home by performing regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and there may come a point where it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your Upvc windows, it is always best to seek professional assistance immediately.