Repairs to uPVC Windows
uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they are not susceptible to get rusty or decay.
Regularly cleaning and lubricating UPVC windows and
window repairs doors is essential. This will reduce repair costs as well as improve the efficiency of energy.
1. Broken Glass
The damaged glass in your windows can cause severe damage to your home and may even be fatal. You should take the time to make sure that your windows are in good working order.
For single pane windows it is fairly easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. If you have double-paned windows that are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance you'll need to find some plastic spacers to aid the new pane in being able to fit perfectly into the frame of the window.
If you're planning to attempt to remove the window panes by yourself it is important to wear the proper safety gear such as gloves that are thick and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor and could be trampled.
It's a good idea to cover the gap with tape after the glass has been removed. This will keep water and drafts from entering your property until a professional arrives to fix the window. It also acts as a barrier that will prevent any intruders to gain access into your home. If the distance between the window and the door is substantial, you may prefer security screens that includes windows. This will provide the best of both.
2. Sagging
Upvc is a long-lasting and energy efficient alternative to timber sash window. Over time, they can be affected by a variety of issues such as sliding. A sagging window in uPVC can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from worsening.
Repositioning the hinges can aid in fixing a
window repairs that is sagging. First, you'll need to open the windows so you can access the frame. After that, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and verify the fit. If you're happy with the fit, you can tighten the screws to ensure they remain in the right place.
If you are unable to move the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are watertight and secure from draughts.
uPVC handles may also loosen. The majority of the time it is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. You'll first need to close the window and perform an initial fitting. The corner joints of the sash need to align with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism back into place.
3. Water Leaks
It is crucial to act if you awake each day to find mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature of your home. The most common cause for leaking uPVC windows is that the sealant around the frame has been damaged or not present.
This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem is, the old caulking might need to be removed. It is essential to keep in mind that when it is about uPVC
window repairs you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and could decrease the efficiency of your energy usage.
Verify that the drainage holes have no debris in them and ensure that the sill pan is properly angled to drain away from the window. In more extreme instances, you may need to replace the window.
Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and can quickly spread throughout the house.
It is also important to note that if the leakage is coming from between the glass in your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. Again this can easily be corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or are loose and blow open with a breeze It could be hinges that are at the fault. They can be easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.
Like any mechanical component hinges are prone to be damaged over time. It's easy to change a window hinge, but it's easier if someone helps hold the frame.
Verify that the uPVC hinges are open and closed in the right direction. You can check this by looking for the arrows on each hinge. This indicates the direction in which the window should be opened.
Window hinges that aren't working properly could be the result of incorrectly opening the window in a particular way or due to inadequate installation at the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be happy to give you advice.
It is also important to lubricate the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window to open and close more easily. It can also stop corrosion and reduce the risk of sticking. The ideal time to perform this every year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.
5. Draughts
Draughts in windows made of upvc can be caused by a variety of different things. The hinges can also be misaligned due to wear, creating gaps where the sash and frame meet. These can be easily repaired by giving them thorough clean, however when they're beyond repair, it may be necessary to have them aligned or replaced. The interlock may also become misaligned. It is located on the hinge's side and could require to be cleaned. In some instances, it may be necessary to replace the hinges.
These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Another option is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also reduce the possibility of draughts.
Lastly, one of the most effective methods to reduce drafts is to use a draught excluder. These are typically made of fabric that are filled with some kind of filler. They can be placed on the windowsill on top. These will help to stop cold air from entering and keep your home warm and cozy!
With a little regular maintenance and repair, your upvc windows will continue to provide a great level of insulation and security for your home. It is important to remember that all windows will eventually get worn out and it may be cheaper to replace them than to repair them.