Repairs to uPVC Windows
uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to rot or rust like aluminum and timber.
It is important to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs as well as improve energy efficiency.
1. Broken Glass
The damaged glass in your windows can cause serious damage to your home and even be fatal. It is important to ensure that your windows are in good shape.
Single-pane windows are fairly simple to replace and generally fit into frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.
Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass, so that any shards fall onto the cloth instead of onto the floor, where they could be trampled on and cause further damage.
After the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and fix the window. This also serves as a barrier to prevent any criminals from getting into your home. If the gap between the door and the window is large, you might need to consider an alarm system that includes a window. This will give you the best of both.
2. Sagging
uPVC is durable and energy efficient alternative to timber sash window. As time passes, they may be affected by a variety of issues, including sliding. A sagging window can cause problems with light, draughts and even security. It is crucial to act when you realize that your uPVC windows are falling down.
Repositioning the hinges can aid in fixing a window which is sliding. You'll first need to open the windows to get at the frame. With an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you're satisfied with the fit of your window, you can tighten screws to secure them in the right position.
If you cannot reposition the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to lose their tightness. It is important to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.
uPVC handles can also become loose. Most often this is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the
window doctor near me and then perform a test to ensure that it fits. The corner joints of the sash need to be aligned with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into its original position.
3. Water Leaks
It is important to take action if get up each morning to find mouldy walls and
UPVC Window Repairs floors that are wet. Leaks of water from windows can cause structural damage to your home, and impact your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the problem the caulking used previously may require removal before a new layer is applied. It is important to keep in mind that when it comes to
uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and reduce the efficiency of your energy.
Make sure that the drainage holes have no debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious cases you might have to consider replacing the window.
Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in damp conditions and can quickly spread throughout the house.
It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. It is also possible to be fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be at fault when your uPVC window is difficult to open or it opens in a breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.
Like any mechanical part hinges are prone to wear out over time. The process of replacing a hinge on a window is essentially a very simple process, but it's easier to do when you have a person to help hold the frame in place.
It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.
The issue could be caused either by opening the window improperly or a faulty installation in the factory. Sending us a picture via our website will often resolve the problem. We are happy to give advice.
Regularly lubricating the hinges is also necessary. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It also decreases the possibility of a window getting stuck and stop corrosion. This must be done at a minimum once a year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.
5. Draughts
Draughts can be caused by a variety of different things. The hinges can also become disaligned as a result of wear, creating gaps where the sash meets frame. If they're beyond repair, it might be required to realign them. The interlock may also become unbalanced. It is located on the hinge's side and could require to be cleaned. In some instances it is possible to replace the hinges.
These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and will reduce the possibility of draughts.
Lastly, one of the most effective ways to cut down on draughts is by using a draught excluder, these are usually fabric tubes which are filled with a type of filler. They can be positioned on the windowsill on top. They will help block out cold air and keep your home warm and cosy!
With a little maintenance and repairs your windows made of upvc will continue to provide excellent security and insulation for your home. It is crucial to recognize that all windows have a life span and they may reach the point when it's more economical to replace them than repair them. So, if you're experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.