Repairs to uPVC Windows
uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber,
uPVC window repair they are not susceptible to rust or rot.
Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from unnecessary repair costs and also increase energy efficiency.
1. Broken Glass
The broken glass in your windows can cause significant damage to your home and may even be fatal. It is essential to ensure that your windows are in good condition.
For single pane windows, it is fairly easy to replace windows, and the new one is usually able to fit into the frame of the previous one easily. If you have
double glazed window repairs-paned windows that are held together by internal beading, it will be harder to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.
If you're planning to try to remove the window panes yourself it is crucial to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also an excellent idea to lay down a dropcloth before you begin working on the glass to ensure that any shards fall onto the cloth instead of onto the floor where they can be trampled upon and cause further damage.
It's a great idea to seal the gap after the glass is removed. This will prevent water and drafts from entering your home until a professional is able to fix the window. It also acts as a barrier, preventing any intruders from gaining entry into your home. If the gap is large, you may want to consider using an alarm door that comes with an integrated window, since it will provide the best of both worlds.
2. Sagging
Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from worsening.
Repositioning the hinges can help fix a window that is sagging. You'll first need to open the windows to access the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and verify the fitting. If you are happy with the fit of the window, tighten the screws to secure them in the right position.
If you aren't able to move the hinges, you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out and cause their tightness to decrease. It is important to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.
UPVC handles can also loosen. The majority of the time it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close the window and perform a test fitting. The joint at the corner of the sash should align with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.
3. Water Leaks
If you awake to wet floors and mouldy walls every time it rains it is important that you take action. Water leaks from windows can not only cause degradation of your home's structure but also hinder your efforts to control the temperature within your home. Most often,
upvc window repairs window leaks are caused by a lack or damage to the sealant.
This is a fairly simple fix and should be undertaken by any DIY expert. Depending on how serious the problem is, the old caulking might need to be removed. When it comes to uPVC repair, you must avoid 'over-caulking'. This will only make your window harder to clean and reduce its energy efficiency.
Check that any drainage holes do not have debris inside them and that the sill pan has been angled correctly to drain away from the window. In more serious cases you might need to consider replacing the window.
Other indicators of long-term water leakage are sills that are rotten and
Upvc Window Repair the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread throughout the house.
If the leakage occurs between the double-glazed glass, it is more likely the issue is more with the seal rather than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it opens in a breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.
Most households in the UK will have either top hung or side hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. It is essentially a simple process, but it's simpler when you have a person to assist in holding the frame up.
Check that the uPVC hinges are closed and open in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.
The problem with the hinges on windows could be caused by improperly opening the window a certain way or due to improper installation in the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be happy to give you suggestions.
Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It can also lower the chance of windows getting stuck and stop corrosion. It is recommended to perform this every year. WD40 and other solvent-based lubricants should not be used as they could damage your uPVC windows.
5. Draughts
Draughts can be caused by different things. Firstly the hinges, again due to wear and tear can become misaligned, this can cause an opening to appear where the sash meets the frame. This can be easily repaired by giving them good clean, but in the event that they are beyond repair it might be necessary to have them re-aligned or replaced. The interlock, which is on the hinge side of the window, may also become misaligned, again it may be possible to give them a good clean, but in certain cases, it may be necessary to get them replaced.
The second most frequent reason for draughts are the window seals. These can become worn down or damaged over time, and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping can help keep draughts at bay. Replace the
Upvc window repair windows with low-emissivity glass. This will help regulate indoor temperatures and decrease the possibility of draughts.
Another, and most effective methods to reduce draughts is by using a draught excluder. These are typically made of fabric which are filled with a kind of filler. They can be positioned on top of your windowsill. They will keep your home warm by blocking out cold air.
With a bit of regular maintenance and repair windows made of upvc will continue to provide an excellent level of security and insulation for your home. However, it is important to recognise that all windows have a life span and there may come the point when it's more cost-effective to replace them rather than fix them. If you are experiencing issues with your Upvc windows, it's best to seek professional assistance as soon as you can.