Replacement Handles For UPVC WindowsUPVC window handles are available in various styles, however all of them operate the same locking mechanism. To replace a uPVC handle, remove the top screw from the bottom of the window handle which will reveal two screws.
Then, measure the spindle to make sure your new handle will fit. It is important to identify the type of handle you have, since there are various sizes.
Inline Espagnolette Handles
The majority of double-glazed windows feature Espagnolette handles that operate multi-point locks to provide greater security. The handle is controlled by an 7mm square spindle which connects to a geared box inside the frame of the window. The gearbox is able to move the multi-locks as the handle is turned. They are available in a range of styles, including cockspur, inline, and key locking handles.
Our uPVC replacement handle kits are designed to make it simple to replace a damaged or defective window handle with a espagnolette. These uPVC handles include all the fixing screws as well as a range of spindle sizes that will work for most applications. They also come with key plugs to enable them to be converted from standard open/close to fire escape and egress non-locking handles (if utilized in conjunction with the correct key plug).
If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.
Another alternative is our Yale Sparta 2 Inline Espag Handle which has been designed for minimal aesthetic intrusion with a lower base height. It is part of the suited range of hardware and is available with a variety of finishes that all conform to the requirements of BS EN 1670:2007 Grade 5 corrosion resistance. They have also been tested for durability and are suitable for use in coastal areas and with acidic timbers. They are compatible with key-locking inserts that cylinder-immobilise when required.
Cockspur Handles
Cockspur handles are often found on older uPVC or aluminum doors and
Replacement Handles For UPVC Windows windows they are a simple latch and catch arrangement. The handle nose closes onto or into the catch, which is a wedge block made of plastic that is affixed to the frame of the window. The wedges come in various sizes, so it's crucial to determine the step height you require prior to purchasing an alternative handle. Typically, uPVC frames have a handle step of 9mm. aluminium frames tend to use a step height of 21mm.
A cockspur handle is locked using a key, ensuring additional security for your home. The lock is installed inside the handle using an appropriate spindle that fits in the hole of the handle (also called a backset). The spindle measures 7mm square and can be used to open or close the window.
It is crucial to ensure that the new cockspur handle has the same height as the original. It is typically measured from the base spur of the handle to the underside of the handle's nose. This measurement can be referred to as the stack height or backset. It is essential to know this information before ordering any handle.
Cockspur handles are available in straight/universal, cranked or left- or right-handed versions. This is to allow the handles to be fitted onto windows that open from the left or right and to allow the user a better access to the window.
Check if your window needs a restrictor. This is designed to prevent the handle from opening beyond a certain amount. They are typically required for high-rise apartments or commercial buildings for security reasons. However, most domestic homes don't require them.
There are many different styles and colors of cockspur handles including stainless steel and white uPVC steel. Choosing the best one for your windows will depend on your personal taste and style, as well as the way you want the window to perform.
Tilt and Turn Handles
The UK is home to a variety of
double glazed replacement windows-glazed windows featuring tilt and turn handles. Both upvc windows and timber ones have them. The handle can be turned at any angle, even 180 degrees. This allows the window to be fully opened to the room and can also be lowered for ventilation. The handle is locked in this position and requires a key to unlock it when needed.
This kind of handle is easy to replace, as it has only one large handle instead of several smaller ones. This improves the appearance of the handle and is more in line with contemporary minimalistic design trends. They are also easier to clean since they are able to open inwards.
Another benefit of tilt and turn windows is that they are 4 - 8 times stronger than casement windows. This makes them ideal for larger windows and doors. The frames are also made of steel, that adds durability and strength.
The tilt-and turn mechanism is more secure than a casement since the handle can be locked in any position. This is especially crucial in areas where children are present because it stops children from opening the window.
Tilt and turn windows are a favorite option for a lot of homes, as they can be used in a variety of ways. They can be opened horizontally, like a normal window, or dropped down to the hopper style. This is a great choice for those looking to increase the airflow in their homes and can also aid in noise reduction. They are also easy to clean and maintain because the glass is easily removed. These windows are available in a variety of sizes and colors. These windows are suitable for any type of home and are a perfect match for both traditional and modern styles.
Crank Handles
Crank handles are easy to use and offer a great view of the outside, without obscuring the glass. These handles are usually used on casement windows hinged at the side or awning windows. They have an mechanism similar to a window bar and linkage arm, which supports the window sash. The
window handle replacement sash is opened or closed when you turn the handle clockwise. Contrary to other kinds of handles, a crank window's mechanism and handle are subject to significant wear and tear, which can cause the gears strip and the handle to cease working or fall off the shaft of the operator. Monitoring the handle and operator mechanism regularly will ensure that they stay in good working order for the years to be.
A crank handle is an electronic arm that is connected to a rotating shaft that is perpendicular. The arm is operated manually by grabbing it and turning it in a circular motion similar to how you use the sharpener of a pencil. In certain situations the handle may be operated by the leg.
The base of the crank handle is hollow. It's this hollow that allows it to be connected to equipment and machinery. The handle's arm is equipped with a connecting bar that converts the circular motion from the handle into rotary and reciprocating motions that allow you to operate machines and equipment.
Boats are often transported on trailers using crank handles, in addition to the adjusting equipment and machinery. They are usually made of stainless steel that is resistant to corrosion in marine environments. The majority of boat crank handles have been coated in powder to guard against damage and make them easier for cleaning.
If your crank handle isn't working or won't open the window, it could be time to replace it. Before you do that check for the trim mounting screws within the window frame's screen track.