Replacement Handles For UPVC WindowsUPVC window handles are available in a variety of styles, however they all share the same locking mechanism. To replace a uPVC handle, remove the top screw from the base of the window handle which will reveal two screws.
Then, measure the spindle to make sure the new handle is suitable. It is important to know what kind of a handle you have as there are many different sizes.
Inline Espagnolette Handles
Most double-glazed windows have Espagnolette handles which operate multi-point locks for improved security. They function by using a 7mm square spindle from the back of the handle, which connects to a gearbox located inside the window frame that moves multi-locks as it is turned. They come in a variety including cranked, inline key locking and cockspur handles. they are also available as a set to replace a single handle that is broken or worn out.
Our uPVC replacement handle kits are designed
cost to replace windows uk make it easy to replace a damaged or faulty window handle with a espagnolette. These uPVC handle sets come pre packaged with a selection of spindle lengths to suit most applications and have all of the fixing screws needed to fix them. They are also available with key plugs that enable them to be changed from the standard open/close handle to the egress and fire escape locking handles (if used in conjunction with the proper key plug).
If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.
Another alternative is our Yale Sparta 2 Inline Espag Handle that has been designed to be minimally intrusive with a lower base height. It is part of the suited range of hardware and is available in a range of finishes, all of which conform to the requirements of BS EN 1670:2007 Grade 5 corrosion resistance. They have been tested for durability and are suitable for use with acidic woods and
Replacement Handles For UPVC Windows coastal environments. They can be used with cylinder-immobiliser inserts to lock keys when required.
Cockspur Handles
Commonly seen on older uPVC and aluminium windows cockspur handles are a simple catch and latch. The handle's nose slides into or into the catch, which is a block of plastic that is affixed to the frame of the window. Because the wedges are available in different sizes, it is essential that you know what step height you will need before purchasing the new handle. Typically, uPVC frames come with a handle step of 9mm and aluminum frames typically have a step height of 21mm.
The cockspur handle is lockable by using a key, bringing security to your home. The lock is fitted inside the handle using an appropriate spindle that fits in the hole in the handle (also known as a backset). The spindle is 7mm square in cross section and can be used to open or shut the window.
If you are replacing a cockspur handle, it is important to make sure that it has the same height for steps as the original. This is usually measured from the base spur of the handle and ends at the underside of the handle's nose. This measurement is also known as the stack height or backset and it is essential that you have this information prior to purchasing the handle.
Cockspur handles are available in straight/universal, cranked, leftor right-handed models. This permits the handles to be installed on left or right opening window and provides the operator with easier access.
Make sure your window has a restrictor. This is designed to prevent the handle from opening beyond a certain amount. They are typically required for high-rise buildings or commercial buildings for security reasons. However, most domestic homes do not require these.
There are a variety of styles and colors of cockspur handles including white uPVC and brushed steel. The best cockspur handle for your windows is determined by your personal style and taste as well as how you want the window to work.
Tilt and Turn Handles
Tilt and turn handles are a very popular style of handle that are typically found on double glazed windows in the UK. Both upvc windows and timber ones feature these handles. The handle can be rotated at any angle, including 180 degrees. This allows the window to be fully opened into the room, and it can also drop down for ventilation. The handle is locked in this position, which requires an unlocking key to open the handle when it is required to open it.
This type of handle is able to be changed, since it has only one large handle and not multiple smaller ones. This reduces the appearance of the handle, and is more in line with modern minimalistic design trends. In addition to this they are much simpler to clean than casement windows, because the window opens up inwards and is cleanable on both sides.
They are also 4 to 8 times stronger than a casement window. This makes them ideal for doors and windows that are larger. The frames are made of steel core, which provides additional strength and durability.
The tilt-and turn mechanism is more secure than a casement, since the handle can be locked in any position. This is especially important in areas with children, as it prevents them from accidentally opening a window.
Tilt and turn windows are a favorite choice for many homes, as they can be utilized in many ways. They can be opened horizontally like windows, lowered down in a hopper fashion for ventilation or tilted inwards to allow for cleaning and maintenance. This is a great choice for those looking to improve the airflow in their home and can also help with noise reduction. They are also easy to clean and maintain as the glass is easily removable. They are available in various sizes and colors. They are perfect for any home and will complement both traditional and contemporary styles.
Crank Handles
Crank handles are easy to operate and offer an excellent view of the outside, without obscuring the glass. They are commonly employed in casement windows, which hinge on the sides, or awning windows. They feature an mechanism that is similar to windows, with a linkage arm that supports the window sash that opens and closes by cranking the handle in the clockwise direction. Unlike other types of handles, a crank window's mechanism and handle are subject to significant wear and tear, which can cause the gears strip and the handle to cease working or fall off of the operator shaft. Regularly inspecting the handle and the mechanism for operating it will ensure that they stay in good shape for many years.
A crank handle consists of a mechanical arm that's attached to a perpendicular rotating shaft. The handle is rotated in a circular motion by gripping and rotating it, similar to how you operate a sharpener. In certain applications the handle can be operated via a leg.
The base of the crank handle is hollow. This hole allows the handle to be connected to equipment and machinery. The handle's arm also includes a connecting rod which converts the circular motion the handle into rotary or reciprocating motion, which is used to operate machines and equipment.
Boats are usually loaded onto trailers with crank handles, as well as machines and equipment that can be adjusted. They are typically made from stainless steel, which is resistant against corrosion in marine environments. Due to this, the majority of boat crank handles are powder coated to protect them from damage and also to make them easier to clean.