UPVC Window Handle Replacement
It's simple to replace a broken window handle using the appropriate tools. It's important to identify the kind of handle you have and the spindle's size before purchasing the
replacement double glazing windows.
Older uPVC window handles have a spur which extends and
UPVC Window Handle Replacement is locked over the wedge striker. These can be either left or right-handed and need to be matched when replacing.
What kind of lock or handle do I have?
There are many different types of upvc window handles and locks, each with their particular advantages and uses. The type of handle you choose will determine whether or not your locking mechanism is efficient and also if it is simple to open windows. As time passes and with regular use, upvc window handles can become damaged or worn out, making them less secure and efficient. In some instances they could even be completely removed. It is essential to fix your upvc window handles immediately if you notice they are falling off. This will avoid burglaries and keep your home safe.
The good news is that replacing your window handles made of upvc is a relatively simple task that is achievable by nearly anyone. With just a few tools and the proper knowledge it's a straightforward procedure that shouldn't take longer than a couple of minutes. You will need to know the kind of lock or handle you have on your window. This will help you select the appropriate replacement.
Inline Espagnolette Handles
They are typically located on the side of the window. They have a flat design and feature a latch that engages with the locking mechanism of the window frame when turned. Inline upvc handles have a spindle that goes through the center of the handle and then into the window frame to operate the latch.
Cockspur Handles
These handles are typically located on older uPVC windows and have an distinctive hook-shaped design. Cockspur handles have a single screw that is used to secure the handle to the frame of the window and are not as secure as other types of window handles.
Tilt and Turn Handles
In contrast to other handles made of upvc that are tilt and turn, these handles can be turned to open the windows and tilted inwards to allow ventilation. They have a 7mm spindle at the back and are available both in right and left-handed versions.
It is essential to know the spindle's size prior to purchasing a new upvc handles. Not all are exactly the same size. Drop something in the middle of the hole to check the length. This is the length of the spindle that will fit your window.
What is a spindle?
uPVC window handles operate in a similar manner to doors. By turning the handle, you are able to open a latch in the frame. This unlocks the window to allow it to be opened and closed. The handles could be damaged, particularly if they're often used or are subjected to harsh conditions. It is possible to replace the handles on your uPVC window if they're not operating properly.
There are many different types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. These handles are designed to fit in the uPVC frames in a variety of ways. Each handle uses a specific spindle to lock the mechanism fitted into the window. It is essential to determine the type of handle installed on your uPVC windows to ensure that you replace it with the correct one.
The base of the handle will inform you what kind of uPVC it is. A snap-in cover should be over the screw that holds the base of the handle in place. Once you remove this and you'll be able to observe the second screw that holds the handle base in position. Once both screws have been removed then you should be able to pull the handle from the uPVC.
After taking off the uPVC handle, remove it from the locking mechanism. Be sure to note the length of the spindle since you'll need to make sure that you buy an alternative that is the same length as your original handle and locking mechanism.
The main issue with most uPVC window handle problems is that the spindle becomes worn out and can no longer operate the locking mechanism. This could be due to damage from constant use or a loosening of the locking mechanism or even rust over time. When this happens it is required to replace the window handle and locking mechanism to restore the full functionality to your uPVC windows.
How do I remove the handle from the previous one?
Window handles can be damaged or destroyed over time. It is crucial to repair them as quickly as possible to ensure your security. It is good to know that replacing a damaged or worn handle is a relatively simple task that can be carried out in just over an hour and doesn't require any specialized tools.
The first step in removing the handle that was previously used is to take off the screw situated at the top of the base of the handle. After this screw is removed, the handle can be pulled away from the base. There will be another screw located at the bottom of the handle's base, and it can be removed as well. After both screws are removed, the handle can be removed from the base of the window.
After removing the old handle and align the fixing holes of the new handle to the holes already present in the window frame. If there is a sticker or cap on the new handle, remove it if necessary and then screw the handle in place. Once the handle is in place, it is important to test that it is working by turning the handle and ensuring that the lock mechanism activates.
Espag handles have a spindle which protrudes from the handle and slots into the multipoint locking mechanism on the window frame. Cadenza windows have a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and hang over the frame of the window or the transom bar crossmember.
After you have installed the new handle, slide the spindle into the window lock and tighten it. Replace the snap-in cover and screw cap (if necessary) once the handle is securely fixed. The handle is now ready for use by opening and closing the window several times to ensure that it works correctly and securely.
How do I install the new handle?
Changing your uPVC window handle isn't a big deal and the process is quite simple. You'll need a screwdriver and a bit of perseverance. First, make sure that the handle is not locked. Remove any screws visible. You can also replace them with screw caps. After removing the handle it is necessary to take an note of the length of the spindle that extends from the back of the handle. This is crucial since it will determine the kind of handle you'll need to buy.
Espagnolette handles that are made of uPVC are the most popular kind of handle. The spindle passes through the handle to activate the locking mechanism within the window frame. Once the handle is turned it opens the latch on the window, allowing it to open. With time and
Upvc window handle replacement regular use, espagnolette handles can be damaged or damaged, making it necessary to find replacements.
Cadenza handles are a form of uPVC handle that is typically used in tilt and turn windows. They feature a protruding knife that operates a multiple-point locking mechanism inside the window. They are more secure than an espagnolette handle as they can only open from the inside. They can be replaced using the same procedure as you would with espagnolette handles however, ensure that the new handle is angled, not flat.
Once you have decided on the right handle for you, you can simply align the new handle with the existing screw holes and then screw it into place. You should then put the screw covers back on and make sure the new handle functions properly. This is done by shifting the handle from the locked to the unlocked position and the reverse direction a few times. It may be worth contacting an expert to see whether you can solve any issues.