How to Replace a UPVC Window Handle
If your upvc window handle is broken, don't panic. Replacing a window handle made of upvc is a fairly simple job and can be completed in just a few steps.
No matter if it's an in-line or a cranked window handle, they all have an oval spindle protruding out of the back plate. This spindle is then slotted into the locking device.
Identify the type of lock and handle
Over time window handles or locks can be damaged and
glazier lose their functionality. It is possible to fix this problem without replacing the entire uPVC unit. The first thing you should do is identify the kind and
Glazier size of the lock and handle. This will help you determine the replacement parts you need.
Identifying the type of handle is done by looking at the base of the handle. There is an anchoring screw or pin that holds the handle to its base. If the screw is missing it could be a sign the handle is separated from the base section. If the handle has split internally and is no longer gripping the spindle, this could also indicate that it needs replacing.
There are many uPVC handles, but the Espag handle is the most common. These are typically fixed with two bolts and have a spindle that engages the lock mechanism inside the frame of the window. These handles are usually used on uPVC tilt and turn windows.
Cockspur handles are another type of uPVC handle. They are similar to the Espag handles, but have a lower projection from the frame. These handles are usually used on older uPVC windows.
Venetian window handles are another alternative. They are similar to Espag handles, but have a flat bottom which allows them to be installed in a flush position with the frame. These handles are a great choice for homeowners looking for an elegant handle that will blend in with their uPVC frames. These handles come in a range of colors that will match any style.
Find the spindle's measurement.
Before purchasing a new handle, it's essential to know how the old one handle is attached. This will determine how tight or loose it is and if it will fit correctly into the window frame. This can be accomplished by identifying the type of handle and determining the spindle's measurement. The spindle is a metal shaft that connects your handle to the lock inside the window frame. The spindle comes in a variety of sizes. The current standard for the industry is 8mm. Older handles might have a cross-section of 9mm, therefore it's important to determine the cross-section of the old one to ensure you get the right size replacement.
There are many types of window handles. The most common are the inline Espagnolette handles and cockspur handles. These handles are used to operate a locking system in the window. They use shootbolt rods that secure the window when it is closed. Depending on the type of handle they are held in place by screws or pins.
You can find replacement handles for windows made of upvc online and in a lot of DIY stores. They are available in a variety of finishes and are suitable for new or replacement windows. For added security, they can be either key-locking or non-locking in fire-escape.
To remove the old handle just open the window towards the door and remove all screws that hold it in place. Be careful not to cause damage to the screws and place them in a container for future use. After the screws are removed, gently pull out the handle and take a measurement from the base to the tip of the spindle. This will provide you with the information needed to buy the right replacement. The spindle of the handle is the steel shaft that connects it to a gearbox that locks the window frame.
Remove the handle that was previously used
The replacement of the handle of a uPVC window handle is an easy task and usually will take no more than five minutes using the proper tools. The first step is to identify the lock type and handle that will help you identify the right replacement. After that, weighing the spindle will make sure that the new handle is a good for the job. The old handle needs to be removed and replaced with the new one.
Most uPVC handles come with inline Espagnolette handles. These handles have central spindles that slot into the locking mechanism on the window. They are generally simple to remove, but you may have to apply force when they're stuck. There are typically two screws that hold the handle in place, which can be removed with a screwdriver or pliers. Depending on the kind of handle, you may also have to remove any pins holding it in place.
After the screws have been removed After that, you can take off the handle that was previously attached. The top of the base plate will be visible once the handle is in the open position, showing two screws that you can remove. If the sticker is still on, you will need to remove it.
With the screws that came off the handle, you can now screw the new handle into the appropriate position. Make sure that the screw holes are aligned on the window to the holes in the handle. After you've done this then replace the screw caps. Test the new handle. Changes to a window made of uPVC can be a simple and quick task, but you need to take the time to do it correctly.
Fit the new handle
If you've been able to successfully remove the existing handle from the frame, it's time to fit your new handle. Begin by locating the screws and then removing them out with your screwdriver. After the screws are removed,
glazier place them in a secure place before moving on to the next step.
Then, you can put the new spindle in the handle by aligning it with the hole in the handle and screwing it into. Make sure that you align the holes of the handle with holes in the window frame and use a screw that is identical to the ones previously used or it could cause the handle to not being secure.
uPVC Espag handles come with a 7mm square spindle that turns the lock mechanism that is attached to the window. This style of handle is found in most modern uPVC windows. uPVC Cockspur handles (also known as Cotswold handles) come with an extended nose that locks over the outer frame or transom bar cross member. They are commonly found in older windows made of uPVC.
Once the new handle has been put installed, it is important to ensure that it operates properly by locking and unlocking the window several times. If everything goes according the plan, the new uPVC handle should be properly attached and running smoothly. If you have any problems these steps will assist you identify the issue and fix it quickly. Bridgewater Glass can help you if you're having problems with your uPVC handles or any other glazed home improvements. Our glaziers can repair or replace different window frames and handles. This makes us a great choice for
double glazed replacement windows glazing.
Test the new handle
As time passes and through regular use over time, uPVC locks and handles are susceptible to damage and wear and wear and tear. This can leave them less effective and secure, so it's important to replace them as quickly as you can. It's also recommended to do this after you upgrade your windows, since changing your handle and lock will maintain the integrity of your new windows.
There are a variety of styles of uPVC window handles. Some are fixed with screws or pins while others are fitted with blades that slide into the lock mechanism. Each type has its own method of replacement, therefore it is important to know which type you've got before you begin working on it.
The most common kind of window handle is the espag. They're typically found on newer uPVC Windows. The spindle extends from the handle to the lock gearbox and activates the locking mechanism when you open the window.