Double Glazing
window replacement Repair
Over time, double glazing can become problematic over time. For example it might be difficult to open windows or have doors that are snagged. Fortunately, these problems can be fixed with ease.
Many homeowners will attempt to solve these issues on their own, however, this should be left to the experts. It is dangerous to attempt to fix these issues without the right tools and knowledge.
Broken Panes
A damaged window can be a frustrating and annoying issue. It can let hot or cold air into your home and leave a gap which allows moisture or debris to enter. This can affect the efficiency of your AC or furnace will need to work harder to keep your home cool. Depending on the weather and whether you have single or double-pane windows, you might be able to temporarily fix the damage by using silicone sealant. However, a permanent fix will require expert assistance.
The tape is strong enough to repair a damaged window. A strip of tape can be placed over the crack to stop it from getting any worse. A crack that extends into the glass or is too big to cover with tape, will need to be completely replaced.
Broken glass can result from various factors: a pebble from the lawnmower that lands on the window; an unintentionally placed drink heavily on a glass-topped coffee table or a pet's exuberant jump when you open the door. The frames of your window could move over time and break the plastic that holds the glass sheets in place.
Wear thick work gloves when you have a broken pane of glass. Place a cardboard box near the pane to collect any fragments. Remove the sash and work on an even surface, such as the table. Wear a mask to ensure not to breathe the glass shards.
After you have removed the old glass, take off any varnish and paint from the window frame. You can also use a heat gun to soften any old glazing putty and metal glazing points that were used to hold the glass in the first place.
You can then determine the opening size for the new pane. It is best to order your replacement glass slightly smaller than the opening of the original to allow for expansion and contraction. You can ask your local hardware store or home center cut it according to these measurements.
Put the glass in the frame. Fill any gaps with silicone caulk. You can purchase it at a local home improvement store. Smooth the caulk using a putty knife. Add glazier's points to the frames and corners of the glass every six inches so that the pane is held securely.
Condensation
Condensation can happen on double-glazed windows, whether they are old or new. This is especially the case in winter, when colder air collides with warm glass. It can be a problem but it is not usually an issue. This is because condensation on windows actually indicates that your double glazing is working properly.
It could be an indication that your seal is failing and moisture is entering the gap. If you notice a milky appearance on your window or water beads appear across the surface, it needs to be addressed to prevent mold, mildew, or further damage.
Condensation can be easily removed. A technician will drill a small number of holes into the window frame, which allows the moisture trapped to go away. This process is called defogging, and it can also be used to eliminate staining caused by the trapped moisture.
Defrogging doesn't fix the underlying issue of a faulty window seal. In fact, it might not do so even in the event that the condensation is gone, as the compromised air that was in between the panes is still there. This could mean that you still not get the same amount of heat insulation from your windows as you should.
It's important to consult an expert as soon you notice moisture in your windows to determine the next steps. They might be able recommend a solution, like putting vents in the windows to let fresh air in, but not letting warm air escape.
The final thing you would like to happen is for your double glazing to fail, especially when it's costly to replace. With the right skills, equipment and experience, you can repair your double glazing to keep it in good working order for a long time. Contact us today if you need double repair work for your double glazing. We provide a range of services that range from replacing one or more panes glass to installing energy-efficient upgrades.
Leaks
Leaks can cause damage and can be costly to fix. It's costly to fix, and is usually an indication that your home has other issues such as dry rot or mould. It is essential to repair a leak as quickly as possible.
If you notice an air draught emanating from your double-glazed windows, it's likely that the seal inside the sealed unit has failed. This could also indicate that the argon gas that is used to insulate the glass panes has gone out. This can be fixed by a specialist technician who will reseal the window.
Double-glazed windows can turn cloudy or misty because of dirt. This usually means that the seal is failing and the glass must be cleaned. A professional can do this by using high-pressure water jets to quickly clean the glass.
If condensation is developing between the two panes of glass in your double glazing, this is a sign that the seal has sprung to leak and that there is no argon in the panes of glass. This is a serious problem and could indicate that your double glazing does not protect your home as effectively as it ought to. It can be fixed by replacing the glass unit, however it must be done earlier rather than later as the performance of your double-glazed window will have been affected.
If you own new double-glazed windows that are under warranty, you should contact the company who installed them and report any problems with the units or the sealing of the glass, as it is unlikely to be covered by the warranty. You'll lose your warranty in the event that you attempt to repair the units yourself or alter them. We recommend hiring a
double glazing repair specialist.
Weather Damage
Double-glazed windows need a strong frame to keep the glass panes together and
double glazing repair hold them in place, especially in extreme weather conditions. Ice, snow high winds and storms that are tumultuous can result in damage to your windows. If you notice cracks dents or holes in your window, call a professional to repair your double glazing.
If you notice that water is leaking out of the bottom of your window, it could be a sign there is a breach in the seal within the window. This lets moisture infiltrate your home. Additionally to that, your uPVC or aluminum window frame might be warping or bending. To fix this, you'll need to replace the window seal and then re-insert it into the frame.
Window seals ensure that double-glazed windows are airtight, keep heat from entering your home and prevent condensation between the glass panes. The window seals, which keep the glass in place are made of uPVC or aluminum. When the window seals fail, you could be faced with issues like the loss of energy, draughts or windows that have mist.
The failure of the insulating gases inside double-glazed windows is a common reason for windows to mist. The argon gases keep the glass in place, and create an airtight sealing, but if it is damaged or worn out, the gases can escape. The gases released by argon can cause condensation between the glass panes.
This problem can be fixed by replacing the window seal, then re-inserting the glass and applying an anti-fogging solution to prevent condensation from occurring in the future. It is recommended to hire an expert to complete the work for you.
While it is essential to have double-glazed windows they are not impervious to abrasions and will need to be repaired at times. Fortunately, many windows can be restored without the necessity of replacement. It is best to have some basic tools available.