Double Glazing Lock Repairs
A good quality lock on your doors and windows can stop burglars from getting into your home. Generally, they don't like breaking glass or squeezing through windows that are open.
However, some double glazing owners have had issues with their door or window lock after it's been installed. These issues can usually be resolved without the need to replace double glazing.
Broken or faulty locks
If your uPVC window or door lock is damaged or broken and requires a locksmith, they can fix it for you. They can fix the striker plates, hinges and locks on your double glazing. They can also reposition the cylinder in order to fix any misalignment which could cause your handle to operate correctly.
The mechanism could be seized when the key is inserted into the lock, but it will not turn or become difficult to insert. Dirt or grease can be trapped in the mechanism. If this is the case, then it might be possible to clean the lock and then lubricate. Use a dry lubricant like graphite or teflon but not oil as oil can attract dirt and cause it to stick to the mechanism's inside. After the lubrication, insert the key into the lock and turn it. The lubricant needs to get into the mechanism, and the lock should turn easily.
A damaged lock can be caused by loose screws inside the mechanism of the lock. They can loosen and fall out, or even break off completely preventing the lock to work properly. The screws can be tightened by using the help of a screwdriver. However, be careful not to over tighten them. This could cause damage to the internal components.
A faulty lock can be dangerous for you and your family members particularly if you have young children. It's possible for them to open the door without knowing and thus allow them access to your home. If you're worried about the possibility that this might occur, a professional locksmith can help you re-secure the double glazing doors.
Misty Glaze are a professional
upvc repairs near me and double glazing company in Lancing, who can repair any type of defective and damaged mechanisms such as handles, cylinders, handles and lock systems on both
upvc repairs windows and doors. We can also reconfigure your uPVC or double glazing locking system to meet your specific needs, which means that in a lot of cases replacement windows and doors are not required.
Handles that are damaged or are damaged
A lot of double-glazed windows come with a multi-point lock as part of the overall security package. This is an excellent option for those who are worried about potential burglars trying to gain access to their home. It is also a good idea to ask your installer about anti-lift locks, these can be fitted on top of the locks already in place and ensure that your window is secured in its closed position.
It's not uncommon for handle locks to get damaged or even fail - they are the first component of your window that will be pushed open by criminals who want to break in. The good news is that this is among the most straightforward parts to repair.
Modern handles made of aluminium and uPVC have a multi-point locking mechanism known as Espagnolette which is designed to resist forced entry. This security upgrade is usually provided as an additional option on new uPVC window installations. Older style uPVC and aluminium handles can be upgraded to lock bolts that shoot and again as an additional option on double-glazed windows.
If a handle is defective, it's crucial to get it repaired as quickly as you can. A damaged handle could prevent the window from closing properly and allow a draft to enter. It can also be a flaw that opportunistic thieves could exploit,
upvc repairs near me putting your family's belongings and you at risk.
To repair the broken mechanism, first access the window frame, then take off the broken handle. The gearbox is then opened to determine the type of gearbox that is used to open the handle. This will allow an alternative that is compatible with the profile and internal window frame mechanisms.
After the mechanism has been replaced the handle can then be re-attached with the original screws - but we would recommend replacing them with longer ones as this will give an even more secure fit. The final step is to apply a coating of clear sealant to shield the handle from further rust. After that your window will be functional again and at a fraction of the cost of replacing the entire window.
Hinges that are broken or damaged
If your windows do not close properly, you could experience draughts, a weakening of your home's security barrier and a higher risk of damp or water damage. Windows hinges that break or become faulty are a common problem and can be fixed easily.
If your uPVC windows don't close or open, it is likely that hinges need to be replaced or repaired. Many window companies will require you to purchase a new
window doctor unit to fix this simple issue, but we are able to replace the hinges to save you money.
Window hinges are often damaged after repeated use, or they might be damaged by corrosion over time. If you've got a broken window hinge, it's crucial to take the necessary precautions to prevent further damage. This includes not causing the window to close or open.
You can find the right parts for your hinge by identifying its type. The most commonly used kinds of window hinges include Maco, Mila, Roto and many other brands. It is recommended to speak with an expert in this situation so that you don't make the mistake of buying parts that aren't compatible with your existing hardware and cause further damage.
The hinges that are not working properly can be a huge problem for uPVC doors and windows. They can be a major source of noise and also allow water to infiltrate that can cause damage to your windows.
To fix this issue, first verify whether the pin barrel on both sides of the hinge is aligned. If it isn't then tap the head pin using a hammer to make an arc in the hinge barrel. This will help keep the pin in place. Ask a second person to hold the door as you take the hinges and hinges from both the doorjamb as well as the door. Replace the hinges with ones of a matching size and install the screws with glue. Finally fix the hinges using clamps or weights until the glue is drying.
Once the hinges have been fixed after which you will be able to install the door and re-attach the handle. It is recommended to replace the screws using the same length of wood dowels as the original screw, so that they match up with each one.
Glass that is Broken or damaged
uPVC Windows can become damaged over time, even though they are extremely effective in keeping cold out and retaining the heat. This can include broken or damaged glass and faulty locks. This is a problem that can be costly if left unattended. It can also detract from the aesthetics of your house and may lead to a loss of insulation, so it's important to repair any damage as quickly as possible.
You can repair the crack in your glass by yourself if you have the appropriate tools and techniques. Make sure that the area around the glass that has been broken is free of debris to ensure that shards do not cause injury or trip hazards. Then, you must remove any broken pieces and dispose of them appropriately. Then, place masking tape to the entire area to prevent fragments from bouncing around and sticking to your skin when you move them. If you're dealing with a double-pane glass, it's best to pre-fit the pane of glass before glueing it back in place to ensure that you'll have enough room to complete the project.
Use a clean, dry cloth to clean the surface of the broken glass and the frame before applying the glue. Follow the directions for application and curing time that can differ from one product to the next.