UPVC Window Handle Replacement
It is easy to repair a damaged window handle with the proper tools. It is important to know what kind of handle you have as well as the size of its spindle before purchasing an alternative.
Older uPVC windows use handles with cockspurs, which have an extension spur that can the lock of a wedge cockspur striker plate. They can be left or right-handed and need to match when replacing.
What type of lock and handle do I need?
There are many different types of window handles made from upvc and locks, each with their own benefits and purposes. The type of handle you have will determine whether or not the locking mechanism you have is effective and if it's easy to open windows. Over time, and with regular use the handles made of upvc on your windows may be damaged and worn out. This makes them less secure and effective. In some cases, they may even fall off completely. It is crucial to fix your upvc
window replacements handles when you see them falling off. This will help stop potential burglaries and keep your home safe.
It's a task that virtually anyone can perform. You'll need a few basic tools, but with the right knowledge, it is an easy task that will only take a couple of minutes. To get started, you will need to identify the type of lock and handle you have on your upvc window to help you find the perfect replacement.
Inline Espagnolette Handles
They are the most popular kind of upvc handle and are usually placed on the other side of your window. They are flat and come with an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles come with a spindle running through the middle of the handle into the window frame in order to operate the latch.
Cockspur Handles
These handles are usually found on older uPVC window frames and feature an unusual hook-shaped design. Cockspur handles are secured to the frame of the window by a single screw and are less secure than other varieties of window handles.
Tilt and Turn Handles
The tilt and turn handles are different from other handles made of upvc in that they can be rotated to open the window and then lowered into the window to ventilate. They typically have a 7mm spindle at the back of the handle and are available in left and right-handed versions.
When you are purchasing replacement handles for upvc, it is important to verify the length of the spindle because not all handles are the same size. To determine the length of your upvc handle, simply drop something into the middle of the hole and measure how far it extends before it reaches an obstruction. This is the maximum size of spindle that will fit in your windows.
What is the spindle?
uPVC window handles work similarly as doors. By turning the handle, you will be able to open a latch in the frame. The window is then opened and closed. The handles can become damaged, especially if they're often used or are exposed to harsh conditions. It is possible to replace the handles on your uPVC window if they're not able to operate it properly.
There are many different types of uPVC handles, including Espag,
UPVC Window Handle Replacement Cockspur, and Spaded handles. They are designed in a variety ways to fit into uPVC frames. Each handle type utilizes an individual spindle to lock the window mechanism. It is important to identify the type of handle you have installed on your uPVC windows to ensure that you replace it with a suitable one.
The base of the handle will tell you what kind of uPVC it is. There should be a'snap in cover' over one screw that holds the handle base in place. Take it off and you should be able to see the second screw on the opposite side of the base of the handle. Once both screws are removed you should be in a position to pull the handle away from the uPVC window.
Once you have removed the uPVC window handle, you will need to carefully unscrew the spindle that was previously attached to the locking mechanism. Note the length of the spindle. You'll need to buy a replacement of the same length as the handle that was originally used and locking device.
The primary issue with uPVC window handle problems is that the spindle becomes worn out and cannot longer operate the locking mechanism. This could be due damage from constant use or loosening of the locking mechanism or even rust over time. If this happens, you'll have to replace both the window handle and locking mechanism to restore the full functionality of your uPVC Windows.
How do I take off the handle that was previously attached?
Over time and through everyday usage, window handles could be damaged or destroyed, and if this happens, it is essential to fix them as soon as possible to ensure the security of your home. It is simple to replace a worn or damaged handle. The task can be completed in less than a minute without the need for any special tools.
To take off the handle, you first need to remove the screw at the bottom of the handle. Once the screw is removed, the handle will be pulled away from the base. A second screw is located at the bottom of the handle. It can also be removed. Once these two screws are removed,
UPVC Window Handle Replacement the handle can be removed from the base of the window.
Once the old handle is removed, you can take the new handle and line up the fixing holes with the holes present in the window frame. There may be a little cap or sticker on the new handle, so take them off these if necessary and then screw the handle into the frame. Once the handle is in place, it is essential to check whether it functions by turning the handle and ensuring that the lock mechanism is activated.
Espag handles have spindles that extend from the handle and slot into the multipoint locking mechanism on the frame of the window. Cadenza windows feature a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and hook over the outer frame of the window or the transom crossmember of the bar.
Once you have the new handle in place, you can insert the spindle inside the lock inside the window and then tighten it down. Once the handle is securely fixed in place, replace the'snap in' cover and the screw cap (if applicable). Now that the handle is ready for use, open and close the window a few times to make sure it is working correctly and securely.
How do I install the new handle?
It's not difficult to alter the handle on your uPVC windows. The process is very simple. All you need is a screwdriver, and a small amount of patience. The first thing to do is make sure that the old handle is locked and then remove any screws that are visible, you can also replace them with screw caps if required. After removing the handle you'll need to take note of the length of the spindle that extends from the back. This is important as it will determine what kind of handle you will need to buy.
Espagnolette handles are the most common type of handle used on uPVC windows. They have a spindle that runs through the handle and acts as a locking mechanism within the frame of the window. The handle opens the latch, allowing the window to open. During regular use and over time, espagnolette handles may be damaged.
Cadenza handles are a second type of uPVC window handle commonly used on tilt and turn windows. They feature a protruding blade that works with a multiple-point locking mechanism within the window. They are more secure than an espagnolette handle as they can only open from the inside. They can be replaced by the same procedure as espagnolette handles, however you should ensure that the new handle has a curved blade, as opposed to a flat one.
Once you have selected the right handle, simply align the new handle to existing screw holes before screwing it in place. Then, you should put the screw covers on and test the new handle.