UPVC Window Handle ReplacementIt is easy to repair a broken window handle with the right tools. It is important to know the type of handle you have and its spindle size before you purchase an alternative.
Older uPVC windows use handles with cockspurs, which have an extension spur that can lock over a cockspur wedge striker plate. These can be right-handed or left-handed and must be compatible when replaced.
What kind of lock or handle do you have? I have?
There are a variety of window handles made of upvc and locks, each having their own benefits and purposes. The type of handle that you have will determine whether or not your locking mechanism is effective and if it's easy to open windows. Over time, and with regular use,
UPVC Window Handle Replacement the upvc handles on your windows may get worn out and damaged. This makes them less secure and less effective. In some cases they may even fall off completely. If you notice that your upvc window handles have been removed,
Upvc Window Handle Replacement it's essential to fix them as soon as possible. This will help to prevent potential break-ins and protect your home from burglary.
It's a task that anyone can complete. You'll require a few tools, but with proper knowledge, it's simple and should only take a couple of minutes. You will need to know the kind of handle or lock that you have on your window. This will allow you to choose the appropriate replacement.
Inline Espagnolette Handles
They are usually found on the outside of the window. They are flat and have a latch which engages the locking mechanism of the window frame. Inline upvc handles feature an elongated spindle that runs through middle of the handle into the window frame to control the latch.
Cockspur Handles
These handles are usually found on older uPVC window frames. They have a distinctive, hook-shaped design. Cockspur handles are secured to the frame of the window by only one screw and are less secure than other varieties of window handle.
Tilt and Turn Handles
The tilt and turn handles differ from other upvc handles in that they can be rotated for opening the window, and then lowered into the window to allow air circulation. They have a 7mm spindle on the back and are available in right and left-handed versions.
It is essential to know the size of the spindle when purchasing a new upvc handles. There are a few that are the exact same size. Drop something in the middle of the hole to check the length. This is the maximum spindle length that will fit in your window.
What is a spindle?
uPVC window handles operate similarly like doors. By turning the handle, you are able to operate a latch within the frame. The window is then opened and shut. These handles can be damaged, especially if used frequently or exposed to harsh conditions. You may have to replace the handles on your uPVC window if they're not able to operate it correctly.
There are several different types of uPVC handles to choose from, comprising Espag, Cockspur and Spaded handle options. These handles are made in a variety of ways to fit into uPVC frames. Each handle type utilizes an entirely different spindle for locking the window mechanism. It is essential to determine the kind of handle that is installed on your uPVC windows to ensure that you replace it with the correct one.
The base section of the handle will inform the type of uPVC it is. There should be a "snap in cover over one screw that holds the handle's base in the correct position. Remove this and then you should be able see the second holding screw on the opposite side of the base section of the handle. Once both screws are removed you should be capable of pulling the handle away from the uPVC window.
After taking off the uPVC handle, carefully remove it from the locking mechanism. Take note of the length of the spindle. You'll need to buy a replacement of the same length as the original handle and locking device.
The most common issue with window handle problems with uPVC is that the handle spindle gets worn out and cannot longer function properly with the locking mechanism. This could be due to corrosion, damage from constant use or the locking mechanism becoming looser. When this happens it is required to replace the window handle and the locking mechanism to restore complete functionality to your uPVC windows.
How do I remove my old handle?
Over time and through everyday use, window handles can be damaged or destroyed, and if this happens it is essential to fix them as soon as possible to ensure the safety of your home. The good news is that replacing a worn or damaged handle is a simple job that can be completed in less than an hour and doesn't require any specialist tools.
The first step in removing the handle that was previously used is to remove the screw situated on the top of the handle base. Once the screw is removed, the handle will be removed. There will be a second screw that is located at the bottom of the handle's base and it can be removed as well. After these two screws have been removed, the handle will be detached from the window's base.
After removing the handle and fixing holes, align the holes of the new handle with the holes that are already in the window frame. If there is a cap or sticker on the new handle, remove it if required and screw the handle into place. Once the handle is in place, it is crucial to verify whether it functions by turning the handle, and ensuring that the lock mechanism activates.
Espag handles have spindles that protrude out of the handle and slot into the multipoint locking mechanism on the window frame. Cadenza windows feature a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and hang over the frame of the window or the transom crossmember of the bar.
After you have installed the new handle, place the spindle into the window lock and tighten it. Once the handle is securely fixed then
replace window handles the snap-in cover and screw cap (if necessary). When the handle is ready for use, open and close the window a couple of times to make sure that it functions correctly and securely.
How do I install the new handle?
Switching your uPVC window handle isn't difficult and the process is simple. You'll need an screwdriver and a bit of patience. The first thing you need to do is make sure that the handle you have previously used is locked and then take out any screws that are visible. you can replace them with screw caps if required. After removing the handle it is necessary to take an note of the length of the spindle that extends from the back of the handle. This is important because it will determine the kind of handle you will need to buy.
Espagnolette handles are the most common kind of handle that is used on uPVC windows. The spindle passes through the handle to control the locking mechanism inside the frame of the window. The handle opens the latch, allowing the window to open. With time and regular use, espagnolette handles can be damaged or damaged which is why it is essential to locate an alternative.
Cadenza handles are another type of uPVC window handle that is commonly used on tilt and turn windows. They feature a protruding blade that operates a multipoint locking mechanism within the window. They are more secure than espagnolette handles because they are able to open from the inside. You can replace them with the same procedure as you would with espagnolette handles however, make sure that the new handle is not angled and flat.
After you have chosen the right handle, simply align the new handle with the existing screw holes before screwing it into place. Then, put the screws on and test the new handle. This is accomplished by moving the handle from locked position to the unlocked and then back to the locked position several times.