Double Glazing Lock Repairs
A good quality lock on your windows and doors will stop burglars from accessing your home. They usually don't want to break glass or try to get through windows that are open.
Some double glazing owners, however, have experienced problems with their door or window lock following the installation. Fortunately, these issues can be fixed without having to buy new double glazing.
Broken or Faulty Locks
A locksmith can fix your uPVC
window replacement lock or door lock if damaged or broken. They can fix hinges, striker plate and locks for double glazing. They can also adjust the cylinder's position to correct any misalignment issues that could be causing the handle to not function properly.
The mechanism might be jammed when the key fits into the lock, but it will not turn or be difficult to insert. The dirt or grease could get stuck in the mechanism. If this is the case it could be possible for the lock to be cleaned and lubricated. Use a dry lubricant such as graphite or teflon but not oil as oil can attract dirt and cause it to stick to the mechanism's inside. After lubricating the lock you should insert the key and then try to turn it. The lubricant should work through the mechanism, and the lock should be able to turn easily.
Loose screws within the lock mechanism can be another cause of a faulty lock. They may loosen and fall out or break completely and stop the lock from working correctly. A screwdriver can be used to tighten the screws but care must be taken not to over-tighten them because this could cause damage to the internal components.
A broken lock can be dangerous for you and your family members especially if you have small children. They could easily open the door without your knowledge which gives them access to your home. If you are worried about this happening, then a licensed locksmith can offer rapid and effective service to secure your double-glazed doors.
Misty Glaze are a professional uPVC and double glazing business in Lancing and can repair any type of defective and damaged mechanisms such as handles, cylinders, handles and lock systems for both uPVC windows and doors. We can also modify your uPVC or double glazing locking system to meet your particular requirements, meaning that in a lot of cases replacement doors and windows are not necessary.
Handles that are broken or are damaged
Many double glazed windows feature a multi-point lock as a part of the overall security package. This is an excellent option for those worried about opportunistic thieves looking for ways to gain access to your home. It's also worth asking your installer about anti-lift locks, these can be fitted with the locks already in place and will keep your window secured in its closed position.
It's not uncommon for handle locks to become damaged or fail - they are the first part of your window that will be forced open by criminals intent on breaking into. Fortunately, the good news is that this is among the easiest parts to fix.
Modern uPVC handles and aluminium handles are equipped with a multi-point locking mechanism known as Espagnolette, which is designed to ward off forced entry. This security upgrade is usually offered as an optional extra on new uPVC window installation. Older style uPVC and aluminium handles can be upgraded to lock bolts that shoot also as an optional feature on all new double-glazed window installations.
When a handle is faulty it's important to get this repaired as quickly as you can. The damaged handles could stop the window from closing properly and allow drafts to enter. It could also be a weakness that thieves can take advantage of, putting your family's belongings and you at risk.
To repair the broken mechanism, first access the window frame, then take off the damaged handle. The gearbox that opens the handle is removed and the type of gear is identified so a replacement can be found that matches the profile of the internal window frame mechanisms.
Once the mechanism is replaced the handle can be fixed with the original screws - however, we usually recommend replacing them with more long screws as this will give a more secure fit. The final step is to seal the handle using a clear sealant. This will protect it from further deterioration. Once that's done the window will be functional again and at less than the cost of replacing the entire window.
Broken or Faulty Hinges
If your windows do not close correctly, draughts may enter your home, the security barriers will weaken and there's an increased risk of water damage or damp. Window hinges that fail or become faulty are a common problem and can be easily repaired.
If your uPVC windows don't open or shut, it is likely that the hinges need to be repaired or replaced. While most window manufacturers require that you purchase a new window unit in order to solve this issue, we're able to replace the hinges that are damaged and save you money.
Window hinges are often damaged from repeated use or they might be damaged by corrosion over time. If you've broken a
window doctor near me hinge,
Window Replacement Near Me it's crucial to take the necessary precautions to prevent further damage. This means not causing the
window Replacement near me to open or
window replacement near me close.
You can find the right parts for your hinge by identifying the type of hinge it is. Common kinds of window hinges include Maco, Mila, Roto and a variety of other brands. Consult a professional to avoid buying parts that do not fit into your existing hardware. This can result in more damage.
A faulty hinge is a major problem for uPVC windows and doors. They can be an important source of noise and can also allow water to get into your windows.
Check whether the pin barrels on both sides of the hinge are aligned. If not, tap the headpin with the hammer to make an incline in the hinge barrel. This will help to keep the pin in the right position. Ask a friend to hold the doors as you take out hinge screws and hinges. Replace the hinges with ones that are of the same size, and then attach the screws using glue. Finally, secure the hinges with clamps or weights until the glue dries.
Once you have repaired your hinges, you can install the door again. You can also attach the handle. It is recommended to replace the screws using the same length of dowels as the screw that was originally used so that they align with each other.
Glass that is Broken or is damaged
While uPVC windows do a great job of keeping the cold out and warm in, they are susceptible to becoming damaged over time. This could include cracked or damaged glass, as well as faulty locks. This is an issue that could be extremely costly if not addressed. It can also hurt your home's aesthetics and lead to a loss in insulation. It is crucial to fix any damage as soon as it occurs.
You can repair the crack in your glass by yourself if you have the proper tools and techniques. First, make sure the surrounding area surrounding the glass is clean so that any shards won't harm anyone and aren't an accident hazard. After that, take away the broken glass pieces and dispose of them in a proper manner. Then, put masking tape over the entire area to prevent fragments from bouncing around and sticking to your skin when you move them. Pre-fitting the glass pane prior to applying glue is a good idea when you have windows that have two panes. This will ensure you have enough space to complete your project.
Before applying the glue, wipe the entire surface of the broken frame and the glass with a an unclean, dry cloth. Follow the application and curing instructions that may differ from product-to-product. Depending on the direction of the crack, you may want to clamp the glass in place during curing. This can be done using lightweight clamps specifically designed to support fragile materials.
