Choosing
uPVC Replacement Window HandlesThe majority of customers agree that Upvc replacement handles are simple to install and feel good. It's crucial to understand that the handle you select for your window has to be suitable for the window.
The height of the step is the most crucial factor. This is the distance between the handle and the frame, or base. Other considerations include lockable styles and mechanisms.
Replacement parts
There is a variety of replacement upvc window handles available to buy. There are a variety of designs and
uPVC Replacement Window Handles colors to pick from, so you're sure to find something that matches your windows. It's easy for you to make an impulse purchase especially when the handle breaks. So it's best to check a few things before buying a replacement. The first thing you should consider is what kind of upvc handle do you have now and what the difference between the types is. The table below lists the most common handles so that you can select the best one to match your window.
Espag handles are the most common and are used on the majority of modern double-glazed windows. They are typically attached to the frame by two screws that are screwed in from above and below.
The spindle bar on the back could be of different in size, and will determine if they are left-handed or right-handed. It's important to take the measurements of the handle you have to ensure that you get the appropriate replacement.
The arm is attached to the frame by two bolts, similar to the Espag handle. However, the arm has a lower projection, to ensure that it doesn't scratch your blinds. This is a great option for those who want the handle to blend in with your blinds, and you have upvc windows.
Cockspur handles are similar to Espag handles but they have a nose which closes over a wedge that rests on the window frame. This kind of handle can be often used on older Upvc windows and also on some wooden windows.
On casement windows the tilt and turn handles are operated by turning the handle or pressing the top of the window. This lets you open the window from inside and clean it from outside without the need to climb a ladder or step across the garden fence. They are also a great option for those with limited mobility. They can be an excellent method to improve security and accessibility at home.
Tips and hints
A lot of people will need to replace their uPVC window handles at some time. It's important to have some tips and tricks to aid in the process.
The first step is determine the type of handle you have at home. Based on the type of handle and the locking mechanism, it may be necessary to replace the handle and lock. For instance, if shoot bolts (espag) and roller cams are seizing or jammed and sizing, you'll have to change them as well as the handle itself.
Thankfully, the majority of uPVC handles are similar and follow industry standard sizing, which makes replacing them a relatively simple process. First, take off the screws that cover the handles. They are typically pozidrive screws. After these screws are removed, you can take the handle apart.
It's a good idea to take note of how far the spindle sticks out from the base of your handle when you separate it. This will allow you to measure the length of the spindle to determine a replacement handle. Simply take note of the length the square peg sticks from the bottom of the handle.
This is especially important for inline uPVC window handles since they'll always be straight and open left or right, and won't operate in the middle. It's a good idea if you are not sure what kind of handle you have in your home to borrow a handle to see how it works.
Another great tip for working out what the hand of the uPVC window handle is to look at the way the handle moves when it is operating. Handles that are hand-operated will turn clockwise or anti-clockwise. If you're not sure then you can always ask someone else to open the window using the handle, and figure out how it operates in this way.
Find the spindle's measurement.
The selection of the right replacement handle for your windows could be a challenge as not all handles are the same size. The spindle is the part that is the mechanism that locks the window. It is essential that when fitting a new handle that you measure the spindle length accurately to ensure it fits. There are numerous kinds of uPVC handles that operate in various ways. It is essential to identify the type you have, and what locking mechanism you are using.
Espag handles have a spindle that extends from the rear of the handle and then into the lock gearbox inside the window frame. When you turn the handle, it then turns the lock in the gearbox, allowing you to open the window. They are installed on uPVC windows with casement and can be locked with keys to provide additional security.
Cockspur handles have an "nose" which closes over an elongated striker block that is placed on the frame. They are typically found on older
double glazing window replacement-glazed uPVC windows. They are also simple and can be locked using keys. These handles can be somewhat more difficult to locate replacements for since they aren't as well-known as the handles with a espagnolette.
If you have an open tilt and turn uPVC window then you will require a particular type of uPVC replacement handle with an entirely different locking mechanism. The handle will tilt the window, and allow it to be rotated around to fully open it. It is essential to make sure that the handle you select has a spindle length at least 55mm, or it will not be able to get into the
window glass replacement near me frame.
You can use the same method to remove and replace this kind of uPVC handle, but you must be cautious when removing the old one. You may have to open the window a little larger than usual to ensure that you reach both screws that are fixing it to the frame. After you have installed your new uPVC handles and confirmed that they are in the right position, you can tighten up the screw covers and test to ensure the lock is working correctly.
Replace the handle with the new one.
If you have the proper replacement handle, it should simply be screwed into the correct position. This will require a screwdriver, but might be easier using an electric one. When screwing the screws in, it is crucial not to over tighten the screws, as this could cause the handle to break or warp.
Inserting the spindle is the second important step in installing the new handle. This is the component that is inserted into the handle and operates the locking mechanism inside the window. It is crucial that the component is properly fitted, as this will permit the window to be opened and closed securely.
There are many different kinds of uPVC window handles. They include:
Espagnolette Handles are handles inline that can be used to open tilt windows and turn them.
Cranked Espagnolette Handles - these are similar to the inline handle but have a curved design that can be useful for windows in difficult-to-access locations.
Tilt and turn handles - These are used to control the opening mechanisms and closing mechanisms when tilting and turn. They also move windows.
The majority of uPVC window frames are fitted with these. In the UK, they are commonly known as "Bay Windows".
It can be very frustrating when your uPVC handle breaks. There is no need to replace the entire uPVC window due to a broken window handle. There are a few simple steps you can take to fix or replace a damaged uPVC handle.
You can repair your broken window handle fast by identifying the type and measuring the spindle. When working with windows and tools it is crucial to prioritize safety. However it is a easy task. It can make all the difference between having a safe and secure home, or an insecure, easily opened window!