UPVC window handle replacement (
Full File)
Replacing a damaged window handle is a easy process, and, with the right tools, it can be accomplished quite quickly. It is important to know the type of handle and the spindle length before buying a replacement.
Older uPVC
window replacement handles have a spur which extends and is locked over the wedge striker. These can be either right or left-handed and have to be replaced with the same handle.
What type of lock or handle do I have
There are many different types of upvc window handles and locks, each having their own benefits and purposes. The type of handle you are using will determine the ease to open your windows and if the locking mechanism functions according to the plan. With time and regular usage, the window handles made of upvc may become damaged or worn out,
Window Handle Replacement rendering them less secure and effective. In some cases they might even be completely removed. If you find that your window handles have been removed, it's important to repair them as quickly as possible. This will prevent possible break-ins, and keep your house safe.
It is a good thing that replacing your upvc window handles is a relatively simple task that is achievable by nearly everyone. You'll need a few basic tools, but with right knowledge, it is simple and should only take a few minutes. To begin you must determine the kind of lock and handle you have on your window, which will help you identify the best replacement.
Inline Espagnolette Handles
These are the most commonly used kind of upvc handle and are typically located on the side of your window. They are flat and have an opening that engages the locking mechanism of the window frame. Inline upvc handles feature a spindle that runs through the middle of the handle and into the window frame in order to operate the latch.
Cockspur Handles
These handles are typically located on older uPVC windows and feature an distinctive hook-shaped design. Cockspur handles are secured to the window frame by a single screw and are less secure than other kinds of window handle.
Tilt and Turn Handles
Unlike the other upvc handles the tilt and
Window Handle Replacement turn handles can be turned to open the windows and tilted inwards for ventilation. They typically have a 7mm spindle at the back of the handle. They are available in left and right-handed versions.
It is crucial to determine the spindle's size prior to purchasing a new upvc handles. Not all are exactly the same size. To determine the length of your handle made of upvc, simply drop something in the middle of the hole, and then measure how far it extends before meeting an obstruction. This is the maximum spindle size that will fit your windows.
What is the spindle?
uPVC window handles function similar as doors, with the user turning the handle to operate an internal latch within the frame. The window is then opened and shut. But, at times, handles can be damaged, especially if they are regularly used or exposed to extreme weather conditions. You may need to replace the handles on your uPVC window if they're not able to operate it properly.
There are a variety of uPVC handles, including Espag, Cockspur, and Spaded handles. These handles are designed to fit into the uPVC frames in various ways and each handle type utilizes a specific spindle to lock the mechanism into the window. It is essential to determine the type of handle installed on your uPVC windows so that you can replace it with the correct one.
The base of the handle will inform you what type of uPVC it is. There should be a'snap in' cover over one screw which holds the handle base in the correct position. Remove this and then you should be able see the second screw on the opposite side of the base of the handle. After both screws have been removed then you should be able to pull the handle from the uPVC.
After removing the uPVC handle, carefully remove it from the locking mechanism. Note the length of the spindle. You'll need buy a
replacement glass for windows of the same length as the handle that was originally used and the locking device.
The spindle wears down and cannot operate the locking mechanism. This could be due damage caused by constant use, a loosening of the locking mechanism or even rust over time. When this happens it is required to replace the window handle as well as the locking mechanism to restore complete functionality to your uPVC windows.
How do I remove the handle that was previously attached?
Window handles are susceptible to being damaged or broken over time. It is crucial to fix them as soon a possible to ensure your safety. It is easy to replace a worn or damaged handle. The job can be completed in under an hour without the need of special tools.
The first step to remove the handle that was previously used is to take off the screw situated at the top of the base of the handle. Once the screw is removed, the handle can be removed. Another screw will be situated at the base of the handle. This can also be removed. After both screws are removed, the handle can be removed from the base portion of the window.
Once the old handle has been removed, grab the new handle and line up the fixing holes with the holes present in the window frame. If there is a sticker or cap on the new handle, remove it if needed and screw the handle into place. It is essential to ensure whether the handle functions after it has been installed. Turn the handle and make sure the lock mechanism is activated.
Espag handles have a spindle which protrudes from the handle and slots into the multipoint locking mechanism of the window frame. Cadenza windows feature an edge with cut-outs which slot into the lock mechanism while Cockspur handles have an extended nose that hangs over either the outer frame or transom bar cross-member in the window.
Once you have the new handle in place, you can insert the spindle into the lock in the window and then tighten it down. Replace the snap-in cover and screw cap (if necessary) once the handle is securely fixed. When the handle is ready for use, you can open and close the window a couple of times to ensure it works correctly and securely.
How do I install the new handle?
It's not difficult to change the handle on your windows made of uPVC. The procedure is easy. All you need is a screwdriver, and a little bit of patience. The first thing you need to do is to ensure that the handle is in the unlocked position and then take out any screws that are visible, you can replace them with screw caps if required. After removing the handle, you'll need to record the length of the spindle that extends from the back. This is crucial since it will determine the kind of handle that you will need to buy.
Espagnolette handles on uPVC are the most well-known type of handle. They have a spindle which runs through the handle and operates a locking mechanism within the window frame. When the handle is turned it releases the latch on the window and allows it to open. Over time and through regular use, espagnolette handles could be damaged or destroyed and it is necessary to find replacements.
Cadenza handles are a type of uPVC handle that is usually employed with tilt and turn windows. They have a protruding knife that works with a multiple-point locking mechanism within the window. They are usually more secure than espagnolette handles since they can only be opened from the inside. You can replace them using the same method that you would for espagnolette handles however, make sure that the new handle is angled, not flat.
After you have chosen the right handle, simply align the new handle to existing screw holes before screwing it in place. After that, you can put the screws on and test your new handle. This is done by moving the handle from locked position to the unlocked and vice versa a few times.