UPVC Window Handle ReplacementIt's easy to replace a broken window handle using the appropriate tools. It is essential to identify the kind of handle you have as well as the size of its spindle before purchasing an alternative.
Older uPVC windows feature cockspur handles for windows. They have a spur that protrudes to secure a wedge-shaped cockspur striker plate. These can be left- or right-handed and must be matched when replacing.
What kind of lock and handle do I have?
There are a variety of window handles made from upvc and locks, each with its particular advantages and uses. The type of handle that you have will determine whether or not your locking mechanism is efficient and also if it is simple to open windows. As time passes, and with regular use the handles made of upvc on your windows can be damaged and worn out. This makes them less secure and effective. In some cases they might even be completely removed. It is essential to fix your upvc window handles as soon as you notice them falling off. This will prevent possible break-ins and will keep your home secure.
It's a task that almost anyone can do. With a few basic tools and the proper knowledge it's a simple procedure that shouldn't take longer than a couple of minutes. To begin, you will need to determine the kind of lock and handle that you have on your window to help you identify the best replacement.
Inline Espagnolette Handles
They are typically found on the outside of the window. They are flat and come with a latch which engages the locking mechanism of the window frame. Inline upvc handles have an elongated spindle that runs through middle of the handle and into the window frame in order to control the latch.
Cockspur Handles
They are typically found on older uPVC window frames and have distinct hook-shaped designs. Cockspur handles have a single screw that secures the handle to the frame of the window and aren't as secure as other types of window handles.
Tilt and Turn Handles
The tilt and turn handles differ from other upvc handles in that they can be turned for opening the window, and then tilted to the
window glass replacement near me to let air circulate. They typically have a 7mm spindle on the back of the handle and are available in left and right-handed versions.
When you are purchasing replacement handles for upvc, it is important to measure the spindle's length since not all of them are identical in size. To determine the length of your handle made of upvc, simply drop something into the middle of the hole and measure how far down it goes before it comes into contact with an obstruction. This is the maximum spindle length that will fit in your window.
What is the spindle?
uPVC window handles function in a similar manner as doors. By turning the handle, you will be able to operate a latch within the frame. The window is then opened and closed. These handles can be damaged, especially if they're often used or are subjected to harsh conditions. You may have to replace the handles on your uPVC window if they are not operating correctly.
There are many types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. These handles are designed to fit inside the uPVC frames in different ways, and each type of handle utilizes a specific spindle to lock the mechanism fitted into the window. This is why it is important to identify the kind of handle is installed on your
upvc window handle replacement window so you can get the correct replacement.
You can find out what kind of uPVC handle you are using by looking at the base section of your handle. A snap-in covers should be over the screw that holds the handle's base in place. Take it off and you should be able to see the second screw at the opposite end of the base of the handle. After both screws have been removed and you are able to remove the handle from the uPVC.
Once you have removed your uPVC window handle you need to carefully remove the spindle that was previously attached to the locking mechanism. Note the length of the spindle. You will need to buy a replacement of the same length as the original handle and locking device.
The primary issue with window handles made of uPVC is that the spindle becomes worn out and cannot longer function properly with the locking mechanism. This can be due to damage caused by constant use or
UPVC Window Handle Replacement loosening of the locking mechanism, or even rust over time. If this occurs, you will need to replace both the window handle and
UPVC Window Handle Replacement locking mechanism to restore the full functionality of your uPVC Windows.
How do I remove the handle that was previously attached?
Window handles can be damaged or broken over time. It is essential to fix them as quickly a possible to ensure your security. The good news is that replacing a worn or damaged handle is a fairly easy task that can be accomplished in less than an hour and doesn't require any specialist tools.
To remove the old handle, you first need to remove the screw at the base of the handle. Once the screw is removed, the handle can be pulled away from the base. There will be a second screw that is located at the bottom of the handle's base, and this can be removed as well. Once both of these screws are removed, the handle can be removed completely from the base of the window.
Once the old handle has been removed, grab the new handle and align the fixing holes with the holes that are currently in the window frame. If there is a cap or sticker on the new handle, remove it if required and screw the handle into place. Once the handle is in place it is crucial to verify that it works by turning the handle and making sure that the lock mechanism activates.
Espag handles come with spindles that protrude out of the handle and slot into the multipoint locking mechanism of the window frame. Cadenza windows come with a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and hook over the outer frame of the window or the transom crossmember of the bar.
After you have installed the new handle, insert the spindle inside the window lock and tighten it. Once the handle is firmly fixed and secured, replace the snap-in cover and the screw cap (if necessary). The handle is now ready to use by opening and closing the window a few times to make sure that it functions properly and securely.
How do I put in the new handle?
It's not difficult to alter the handle on your windows made of uPVC. The process is easy. All you require is a screwdriver and a little bit of patience. The first step is to ensure that the handle you have previously used is locked and then take out any screws that are visible, you can replace them with screw caps if required. After the handle has been removed it is necessary to take an outline of the length of the spindle that protrudes from the back of the handle. This is crucial as it will determine the kind of handle that you will require to purchase.
Espagnolette handles on uPVC are the most popular kind of handle. They feature a spindle that runs through the handle and operates a locking mechanism within the frame of the window. When the handle is turned it releases the latch on the window, allowing it to open. When used regularly and time, espagnolette handles may become damaged.
Cadenza handles are a second type of uPVC window handle, which is typically used on tilt and turn windows. They feature a protruding blade that operates the multipoint locking mechanism inside the window. They are more secure than the espagnolette handle as they can only open from the inside. They can be replaced with the same procedure as espagnolette handles, however you must ensure that the new handle has a curved blade, as opposed to a flat one.
After you have picked the correct handle, simply align the new handle with existing screw holes prior to fixing it with screws.