How to Replace a UPVC Window Handle
If the window handle of your upvc is broken, don't panic. Replacing a window handle made from upvc is an easy task and can be completed in a matter of a few steps.
No matter if you have an in-line or a cranked window handle each one has an elongated spindle that extends out of the back plate. The spindle is fitted into the locking device.
Determine the lock type and handle
Over time, window handles and locks can become damaged or lose their functionality. It is possible to fix this issue without having to replace the entire uPVC unit. One of the first things you need to do is to determine the kind of handle and lock you have to determine the replacement parts you will need.
Identifying the type of handle can be done by looking at the handle's base. There will be the screw or pin that is holding the handle to its base. If the screw is missing, it could be a sign the handle is separated from the base section. If the handle has split internally and no longer grips onto the spindle, this can be a sign that it is in need of replacement.
There are a number of different types of uPVC window handles The most well-known is the Espag handle. They are usually secured with two bolts, and
Nearby the spindle engages the locking mechanism within the window frame. These handles are typically used on uPVC tilt and turn windows.
Another kind of uPVC window handle is the Cockspur handle. They are similar to the Espag handles, but have lower projections from the frame. These handles are generally used on older uPVC windows.
Additionally, there are Venetian window handles, which are similar to the Espag handle, but they have a flat base that allows them to be positioned flush with the frame. These handles are a good option for homeowners who are looking for an elegant handle that will blend with their uPVC frames. The handles are available in a range of colors that can be matched to any design.
Measure the spindle
It is crucial to be aware of how the handle is fixed in place before ordering the replacement. This will tell you how tight or loose it is and if it will fit correctly into the window frame. You can do this by identifying the kind of handle you have and measuring the spindle length. The spindle is a metal shaft that connects the handle to the lock in the window frame. The spindle is available in various sizes. The current standard for the industry is 8mm. Older handles may have a cross-section of 9mm, therefore you'll need to take measurements of your old handle to make sure you get the right size replacement.
There are various kinds of window handles. The most commonly used are the inline Espagnolette handles and cockspur handles. These handles operate with a locking mechanism inside the window with shootbolt rods which secure the window when it is closed. They are secured by pins or screws depending on the kind of handle you have.
You can purchase Upvc handles that are replacement online or in most DIY stores. They are available in various finishes and can be used to make new or replacement windows. For added security they can be key-locking or a non-locking fire escape.
To remove your old handle open the door and loosen the screws that hold it in place. Place the screws in a container to prevent damage. After the screws have been removed, carefully pull out the handle and take a measurement from the base to the tip of the spindle. This will give you the information needed to buy the correct replacement. The spindle of the handle is the shaft made of metal that connects it to the lock gearbox within the window frame.
Remove the handle that was previously used
Changing the handle of a uPVC handle is a simple job that takes less than five minutes if you have the appropriate tools. The first step is to determine the lock type and handle, which will help you find the correct replacement. Then, you can measure the spindle to determine if the handle is suitable. The old handle needs to be removed and replaced with the new.
Most uPVC handles are inline Espagnolette handles, which are equipped with a central spindle that slots into the
window handles replacement's locking mechanism. They are usually easy to take off, but you may need to use force when they are stuck. The handle is typically fixed by two screws that you can remove with the help of a screwdriver. Depending on the type of handle, you may also need to remove any pins that are holding it in the position.
After removing the screws, you can take off the handle you were using previously. The top of the base plate will be visible when the handle is in the open position, revealing two screws you can unscrew. If the sticker is still visible, you'll have to take it off.
With the screws that came off the handle, you can now screw the new handle into the appropriate position. Make sure that the handle is in the unlocked or open position, and then align the screw holes with the holes on the window. After you've done this, replace the screw caps. Test the new handle. It's simple to
replace window handle the uPVC, however you need to make it right.
Replace the handle with the new one.
If you've managed to successfully remove the existing handle from the frame, now is the time to install the new handle. Begin by locating and removing the screw covers using your screwdriver. Once the screw covers have been removed, put them in a safe place before proceeding to the next step.
Then screw the spindle in by aligning it with the existing hole. Align the holes on the handle with the holes in the window frame. Use a screw that is the same size as the previous.
The Espag handle made of uPVC is equipped with a spindle that is 7mm square that rotates the lock mechanism that is mounted on the window. This type of handle can be commonly found in modern uPVC windows. uPVC Cockspur handles (also called Cotswold handles) feature an extended nose that locks over the frame's outer edge or transom bar cross members and are often found in older windows made of uPVC.
Once the new handle is in place, it's important to test that it works properly by locking and unlocking the window a few times. If everything goes according to plan, the replacement uPVC handle should be securely attached and working smoothly. If you are experiencing any issues this guideline will help you identify the issue and fix it quickly. If you're struggling with your uPVC handle or are experiencing other problems with your glazed home improvement, don't hesitate to contact us at Bridgewater Glass for professional assistance. Our glaziers are trained to repair or replace various window frames and handles, making us an excellent choice for your double glazing requirements.
Test the new handle
In time and with regular use the uPVC locks and handles can suffer from damage and wear and wear and. This can leave them less effective and secure and therefore it is important to replace them as soon as possible. This is also a great thing to do when upgrading your windows. Switching your handle and
Nearby locking mechanism will help to maintain the integrity of your new windows.
There are a variety of uPVC window handles. Some are fixed with screws or pins while others have blades which slot into the lock mechanism. Each type has its own method of replacement, therefore it's crucial to know what kind you have before you start working on it.
Espag window handles are the most common type, and are usually found on newer uPVC windows. These handles have a spindle that extends from the handle and goes into the gearbox of the lock and when you open the windows, it activates the locking mechanism. They are also simple to take off. However, it is important to be careful not to damage either the mechanism or handle.