Repairs to uPVC Windows
uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. They don't get rotten or rusty like aluminum and timber.
It is important to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs as well as improve energy efficiency.
1. Broken Glass
If the glass in your window is damaged, it can cause a huge amount of damage to your home, making it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you're doing all you can to ensure that your windows are in good repair.
For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the old panes. In this case you'll need locate some plastic spacers that aid the new pane in being able to fit perfectly into the window frame.
Wearing eye protection and thick gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth before you start working on the glass to ensure that any shards fall on the fabric instead of onto the floor where they could be trodden under and cause further damage.
After the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional is able to come out and fix the window. This will also provide a barrier to prevent any criminals from getting into your home. If the gap is large, you might be interested in the security door with an integrated window, as it will provide the best of both worlds.
2. Sagging
Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. As time passes, they may develop a variety of issues such as sagging. A sagging window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from becoming worse.
Repositioning the hinges can help fix a window that is sliding. You'll first need to open the windows to access the frame. Then, using an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the
window repairs and verify the fit. If you're satisfied with the fit, tighten the screws to ensure they stay in place.
If you are unable to reposition the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to lose their tightness. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows are watertight and secure from draughts.
uPVC handles can also loosen up. The majority of the time it is due to screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need to shut the window and then perform a test fitting. The joints at the corners of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle, and then return the mechanism to its original its original position.
3. Water Leaks
It is important to take action if you awake each day to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home, and impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on how serious the issue is, the old caulking might need to be removed. It is crucial to remember that when it is about uPVC
window repairs, you should not be tempted to 'over-caulk and then make the area more difficult to clean and can reduce your energy efficiency.
Check that any drainage holes do not have debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more severe instances, you may need to replace the window.
Mold spots and rotted sills are another sign of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.
It is also important to note that if the leak is coming from between the glass of your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
Hinges may be to blame for the reason that your
upvc window repairs near me window is difficult to open or if it opens in an ease. They can be easily repaired by any DIYer who is skilled and are usually completed in a matter of minutes.
Nearly every home in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is easier to do when you have a person to assist in holding the frame in place.
Check that the uPVC hinges open and close in the right direction. This can be done by looking for the arrow on each hinge, this shows which way the window should open.
The issue could be caused by opening the window improperly or a faulty installation in the factory. This can often be resolved by sending us a photo via our website and we will be more than happy to give you advice.
It is also essential to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It can also stop corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.
5. Draughts
Draughts can be caused by several different factors. First, the hinges because of wear and tear, could become misaligned. This can cause a gap to form between the sash and the frame. They can be repaired by giving them good cleaning, but in the event that they are beyond repair it may be necessary to have them aligned or replaced. The interlock may also become misaligned. It is located on the hinge side and could require to be cleaned. In certain instances it might be necessary to replace these.
The next most common reason for draughts are the window seals. They are prone to wear or damaged over time, and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures and lessen draughts.
The last way to reduce draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. They can help keep cold air out and keep your home warm and
Window Repairs cozy!
With a little regular maintenance and repair, your upvc windows will provide excellent security and insulation for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it may be more cost-effective to simply replace them than to repair them.