Replacement Handles For UPVC Windows
UPVC window handles are available in various styles, however they all have the same locking mechanism. To replace a uPVC handle, remove the top screw from the bottom of the window handle which will reveal two screws.
Then, take measurements of the spindle to ensure your new handle will fit. It is important to know the kind of handle you have, because there are a variety of sizes.
Inline Espagnolette Handles
Espagnolette handles are found on the majority of modern
double glazing window replacement glazed windows and operate multi-point locks that provide better security. The handle is controlled by an 7mm square spindle which connects to a gearbox inside the frame of the window. This gearbox moves the multi-lock mushrooms as the handle turns. They are available in a variety of styles including cranked, inline key locking and cockspur handles. they can also be provided as sets to replace one handle that is damaged or worn out.
Our uPVC replacement handle kits are designed to make it easy to replace a damaged or defective window handle with a espagnolette. These uPVC handles include all the fixing screws as well as a range of spindle sizes suitable for most applications. They also come with key plugs, which enable them to be transformed from normal open/close to fire escape and egress non-locking handles (if used in conjunction with the proper key plug).
If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.
Yale Sparta Inline Espag Handle is a different option. It was designed to minimize aesthetic interference and has a reduced height at the base. It is part of the suited hardware range and is available in a variety of finishes that all meet the requirements of BS EN1670 : 2007 Grade 5. They have also been tested for endurance and are suitable for use in coastal areas and with acidic timbers. They also work with cylinder immobiliser inserts that allow you to obtain key-locking status if this is required.
Cockspur Handles
Most often found on older uPVC and aluminium windows cockspur handles are a simple catch and latch arrangement. The handle's nose is connected to or put into the catch, which is a wedge of plastic mounted on the frame of the window. The wedges are available in a variety of sizes, so it is essential to know the step height you require prior to purchasing the replacement handle. Typically, uPVC frames have a handle step of 9mm and aluminum frames typically have 21mm as the step size.
A cockspur handle can be secured with a key, ensuring additional security for
Replacement Handles For UPVC Windows your home. The lock is fitted into the handle by spindles that fit into the handle via the lock hole (also called a backset). The spindle is 7mm square in cross-section and is used to either open or close the window.
It is essential to make sure that the new cockspur handle has the same height of the original. It is usually measured from the bottom of the spur on the handle to the underside of the nose of the handle. This measurement is also called the stack height or backset and it is essential that you know this before you purchase the handle.
Cockspur handles are available in straight/universal, cranked or leftor right-handed versions. This allows the handles to be positioned on left or right opening windows, and to give the user easier access to the window.
It is important to check whether or not your window requires a restrictor that is designed to stop the handle being extended beyond a certain amount. Generally, these are required for high rise flats or commercial properties for security reasons. However, the majority of homes don't require them.
There are a variety of styles and colors of cockspur handles, including white uPVC and brushed stainless steel. Selecting the right one for your windows will depend on your personal preferences and style, as well as the way you would like the window to perform.
Handles that tilt and turn
Tilt and turn handles are a popular type of handle, that are typically found on double-glazed windows in the UK. They are found on both timber and upvc windows. The handle is typically placed at 90 degrees, however it can also be rotated in 180 degrees. This lets the window be opened into the room completely and to lower for ventilation. The handle is locked in this position and requires the use of a key to unlock it whenever needed.
This type of handle is able to be changed, since it only has one large handle, and not several smaller ones. This can reduce the overall appearance of the handle and is more in line with the latest minimalist design trends. They are also much easier to clean since they open inwards.
They are also four to eight times stronger than a conventional casement window. This makes them ideal for doors and windows that are larger. The frames are also made of steel, which adds durability and strength.
The tilt and turn mechanism is safer than that of a casement window, as the handle can be locked at any angle. This is particularly crucial in areas where children could reside, as it will stop them from accidentally opening the window.
Many homes opt to tilt and turn windows because they can be used in various ways. They can be opened horizontally as windows that are regular, lowered down in the hopper style to provide ventilation, or tilted backwards for cleaning and maintenance. This is a great choice for those who want to improve airflow and decrease noise in their home. Glass is easily removed, making them easy to clean and maintain. They are available in a variety of sizes and colors. These windows are ideal for any type of home and are a perfect match for both traditional and modern styles.
Crank Handles
Crank handles are simple to operate and offer fantastic views of the outside, without obscuring the glass. They are commonly employed in casement windows, which hinge on the side, or awning windows. They have a mechanism similar to windows, with a linkage arm that supports the window sash, which opens or closes by cranking the handle in the clockwise direction. The mechanism of the crank window unlike other handles is often subjected an extensive amount of wear and tear. This could cause the gears and handle to break or fall off the operator shaft. Regularly checking the handle of the crank and the operator mechanism will ensure they remain in good condition for a number of years.
A crank handle is composed of a shaft made of metal that rotates perpendicularly, and is attached to an arm. The arm is operated manually by grabbing it and turning it in a circular manner similar to how you operate a pencil sharpener. In certain applications the handle could be operated by a leg.
The base of the crank handle is hollow. This allows the handle to be connected to machinery and equipment. The handle's arm features a connecting bar that converts the circular motion from the handle into rotary and reciprocating motions to control machines and equipment.
In addition to adjusting equipment and machinery The crank handles are also commonly used on boats to help them load onto trailers. They're commonly made from stainless steel which is resistant to corrosion in marine environments. The majority of boat crank handles are coated in powder to guard against damage and make them easier to clean.
Replace the crank handle if it stops working or will not allow you to open the window.