White ink heat transfer holds a wide range of uses, and its particular technology and effects are constantly being updated. What remains unchanged is that when the heat transfer film is hot stamped on the substrate, the film needs to be taken off to complete the entire hot stamping process. However, some heat transfer films need to hot-teared, while need in order to become cold-teared. Many customers asks why it is vital? Which membrane 's best?
Today, I will take you to have an in-depth regarding the magic heat dvd movie.
Hot-peel film
The main release portion of hot tear film is wax, which has poor ink absorption performance and small letters basic to to fall off, nevertheless the surface becomes brighter after it is completely cooled.
After the stamping is transferred for the fabric via the ironing machine, it is torn off while is actually possible to hot, saving waiting available free time.
Tear them back within 9 seconds after turning on the press (ambient temperature 35°C), or tear it off when the film surface temperature is greater than 100°C.
If not peeled off in time, the cooling glue will stick to your clothes, allowing the clothes and film to tear apart. There may be problems such as pattern deposits.
Cold peel film
The main release component to the cold tear film is silicon, which has good product stability and a matte effect after thorough cooling.
Transfer first, cool down (below 55 degrees Celsius) and then gently peel off the film, otherwise there is a high-risk of tearing off the pattern.
If you have any questions concerning in which and how to use
dtf printing Machine, you can get in touch with us at the web site.