White ink heat transfer has a wide associated with uses, and its particular technology and effects are constantly being updated. What remains unchanged is each time the heat transfer film is hot stamped on the substrate, the film for you to be be taken off to complete the entire hot stamping process. However, some heat transfer films need to be hot-teared, while others need to be cold-teared. Many customers asks why it is vital? Which membrane is better?
Today, I am going to take you to have an in-depth understanding of the magic heat film.
Hot-peel film
The main release portion of hot tear film is wax, offers poor ink absorption performance and small letters basic to to fall off, however the surface becomes brighter after it is completely cooled.
After the hot stamping is transferred for the fabric the actual ironing machine, it is torn off while it is hot, saving waiting available free time.
Tear it within 9 seconds after turning more than a press (ambient temperature 35°C), or tear it off when the film surface temperature is greater than 100°C.
If not peeled off in time, the cooling glue will stick to your clothes, causing the clothes and film to tear at bay. There may be problems such as pattern deposits.
Cold peel film
The main release component the cold tear film is silicon, which has good product stability and a matte effect after thorough cooling.
Transfer first, cool down (below 55 degrees Celsius) and then gently peel from the lemon the film, otherwise can be certainly a high risk of tearing off the pattern.
In case you have any queries regarding where by and how to use
DTF Printing Machine, you are able to e mail us on our own website.