How to Install a Ghost Immobiliser
Ghost immobilisers can be a powerful deterrent to car thieves. By using this device in conjunction with other security systems and remaining alert, you can build a robust defense against modern, technologically-savvy thieves.
A ghost immobiliser can protect your vehicle from key cloning, hotwiring and relay car theft by the needing a pin number to start the engine. It works by using buttons on your steering wheel or the centre console, which makes it unnoticeable to criminals.
Identifying the Wires
With increasing instances of vehicles being stolen with no owner's key, it's important to protect your vehicle. While thieves may be able to clone your key fob or even steal your
vehicle by hacking its system and stealing the vehicle, a
ghost ii immobiliser immobiliser provides an extra layer of security by blocking all signals from the key fob, making it impossible to start your vehicle without entering a PIN code.
While you could install a ghost immobiliser yourself, it is best to hire an expert technician do the task for you. A skilled technician will know the best location to place the unit and how to properly connect it to the vehicle's wiring. Installation can be complicated, and it's important that all connections are done properly to avoid any damage or malfunctions.
To get the best results, it is recommended to be in a well-lit space and wear the appropriate safety equipment. Also, you should read the user's manual and familiarize yourself with the wiring system. This will assist you in identifying the wires required for the installation and make sure that you have the right tools and equipment to complete the job properly.
Once the wiring is connected, you can connect your battery and determine if the system is functioning properly. Also, ensure that the battery terminals are secure to avoid electrical issues. You should also mark the CAN L and CAN H wires with labels or tape to be able to keep track of them throughout the installation process.
If you want to allow an individual to drive your vehicle for a short period of time, such as for valet parking or when the vehicle is in for a service or repair, the Ghost Immobiliser can be turned on in Transport Mode. You can enter the code using an option on the steering column, central console or door panels. Then, the Ghost Immobiliser will enter PIN code changing mode.
Some thieves try to bypass ghost immobilisers by using jamming and spoofing devices that block or send fake messages to the system. This can be avoided by investing in anti-jamming devices and regularly monitoring your Ghost immobiliser to detect signs that it's been tampered with.
Disconnecting the Battery
The ghost immobiliser is a cutting-edge security device designed to stop car theft. It makes use of cutting-edge technology to monitor and deactivate the engine once the correct PIN code is entered, thereby preventing the vehicle from being stolen by thieves. The system is highly effective and discreet, without visible indicators to deter criminals. However, there may come a time when you need to remove the unit for maintenance or upgrades, or to sell your vehicle.
This procedure requires special tools and expertise, since you will be working using wires and bypassing specific factory components. It is also essential to follow the step-by-step instructions provided by the manufacturer of the ghost immobiliser. It is recommended to seek out an experienced mechanic or
auto ghost immobiliser electrician particularly if you're not experienced in working on vehicles.
It is essential to assess the condition of your battery after identifying and disconnecting the wires. Check that it's clean and free of corrosion, and that the connections are secure. If needed, you may want to replace the battery to ensure it is able to handle the electrical demands of a security system that is aftermarket.
After you have disconnected the wires, you can remove the ghost immobiliser. Wire cutters or strippers can be used to cut off the wires. Be careful not to damage them or their terminals. Label each wire to make it easier to reconnect them later. If the wires were soldered together and you want to use a heat resistant tool to break the connection. It is also important to insulate the cut wires with insulation tape or heat shrink tubing to keep them from short circuits.
Connect the wires to the identified constant 12V power source. Use a fuse tap to protect the connections with fuse. Lastly, connect the grounding wire to a grounded point on the chassis of the vehicle.
Once you have reconnected the wires, start your vehicle and enter the PIN code. Then, restart the engine. If the engine doesn't start then you have successfully removed the ghost immobiliser.
Making the Connections
Ghost immobilisers are an affordable method to increase the security and safety of your vehicle. It is connected to your vehicle's CAN bus system, intercepting signals and preventing the engine from starting until the correct PIN code is entered. This device is almost impossible to disable. It's a great choice for those who want peace of mind and security. In combination with a Thatcham Approved tracking system, it can also help to reduce your insurance costs.
Obtaining and reviewing the wiring diagram of your vehicle model will be essential to the installation process. The diagram will serve as a reference to identify the wires needed for a precise connection. Making use of the correct wiring connectors or soldering techniques will ensure that the connection is durable and secure.
The wires connecting the Ghost immobiliser with the CAN bus need to be identified correctly and connected. It is recommended to use small pieces of tape or labels to mark the CAN H and CAN L wires, as this will avoid confusion during the installation process. The location of these wires will differ on every vehicle, so it is essential to refer to the vehicle's wiring diagram and online resources to identify them.
Once the correct cables have been connected After connecting the correct cables, power will be restored to the Ghost immobiliser. It is a great idea to test your immobiliser. Start the engine without entering the code. This will confirm that the immobiliser was installed correctly and functioning in the way it was intended. It is crucial to test your immobiliser regularly. This will help you detect any issues or problems early.
Another benefit of the ghost immobiliser is that it can be installed in a matter of minutes and does not require any cutting or modifications to your vehicle's internal wiring. It is also an excellent choice for those who wish to increase the security of their vehicles, as it can be utilized in conjunction with a Thatcham-approved alarm or tracker, which will send a notification to your smartphone or tablet when the vehicle is being tampered with.
Mounting the Unit
The Ghost immobiliser is an excellent protection against
car immobiliser ghost thieves, especially when used in conjunction with the GPS tracking system. The device uses existing buttons on the central console, door panels and the steering wheel to create unique sequences that only you know to prevent your vehicle from getting started. The unit
what is ghost immobiliser also weatherproof and tamper-proof. It comes with a 3 year warranty and is recommended by a variety of insurance companies.
It is important to carefully follow the directions when installing the device. While some people are able to handle the work by themselves, it's recommended to consult a professional if you are uncertain. A wire stripper and multimeter are essential tools for identifying the wires and making precise connections. You should also purchase electrical tape and insulation to shield the connections from damage.
