Ghost Immobiliser 2
Secures your vehicle from key cloning and prevents thieves from driving it with original keys. Our latest immobiliser connects to your vehicles data network via CAN and the unique PIN code needs to be entered in order for the engine to begin.
Ghost unlike trackers, does not emit radio frequency signals and can't be identified by diagnostic tools. Ghost does not have LED indicators or buttons that would indicate its presence in your car or van.
Anti-key cloning
The
ghost tracker installation immobiliser was created to prevent key cloning. The device is connected to your vehicle's data network CAN, and creates a unique pin number using the factory buttons in your dashboard and steering. This stops the criminal from being capable of starting your car. If the wrong PIN code is entered, the engine isn't able to start, making it impossible for them to leave with your joy and pride.
A ghost immobiliser uses a new technology which is extremely difficult for thieves to defeat. In contrast to physical deterrents such as wheel locks and steering locks which can be cut or stolen, the ghost immobiliser is a discrete electronic device that can't be easily detected by regular thieves since it doesn't emit any radio signals and operates in a silent manner.
The next-generation immobiliser protects your vehicle from a
range rover sport ghost installer of threats, such as key-hacking, relay attacks and cloned copies. It also stops a thief adding a key or replacing your ECU because it won't permit them to start your car without first entering the correct PIN.
Contrary to other immobilisers, the
ghost immobiliser 2 does not require a key fobs or remotes in order to operate. It can be deactivated through an app on the smartphone of the driver. This is ideal for the times you have to give your car to valet parking or servicing without keys.
The
autowatch ghost installers Ghost-II represents the latest evolution of Ghost's immobiliser. It is designed to make it as simple and user-friendly as possible, while still being as secure as possible. This is achieved by integrating the Ghost-II with the vehicle's CAN data network. This means that there aren't any wires that are able to be hidden or easily found. It comes with built-in features that allow users to disable the Ghost-II simply by connecting to your vehicle's Bluetooth.
OBD port hacking
OBD port hacking is the latest method used by professional car thieves. Thieves can gain access to your vehicle's OBD using a laptop, a mobile app, and some cables that can be bought online for less than PS50. Once they have access, they are able to do anything they want to do, from resetting your vehicle's fault codes, tuning your car, or taking it away in less than a minute.
It can protect your vehicle from being taken away by requiring a unique PIN number to be entered in conjunction with your key fob before you start the engine or leave. It communicates with the vehicle's ECU (Engine Control Unit) via the CAN Data Circuit. This is undetectable by any scanning technology, RF or code grabbing. It comes with a Service/Valet mode that allows your vehicle to start without the PIN code.
To utilize an OBD hacking device you must have a laptop that has software capable of reading the OBD protocol. This can be bought for less than PS100 on ebay or Amazon. You will also need cables with OBD pins that are connected to the CAN bus, these are available on eBay and Amazon for around PS50. The next step is to connect the cable into the wire harness of your car for example, the radio wiring harness.
Once the hacker has established a connection to your vehicles OBD port, they are able to send diagnostics requests to the system at high baud rates which will crash the CAN, and prevent systems within your vehicle from functioning. This can cause your car's engine to stall or lock up.
No need to purchase additional remotes or key fobs
A car immobiliser is excellent piece of anti-theft technology that is used by millions of modern vehicles around the world. An aftermarket immobiliser protects your vehicle with engine ECU software that stops cars from starting if a false transponder is transmitted.
It is possible for a criminal in the event that they know the code to deactivate an
immobiliser ghost, to disable it. The battery in most key fobs can be removed by prying it open and a burglar can use a simple tool to take out the immobiliser's circuit board and replace it with the blank. They will then be able to start your car.
With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes needed. The immobiliser communicates with the vehicle's engine ECU (Engine Control Unit) via a discrete, silent CAN data circuit that is undetectable with diagnostic tools such as the ones used by high-tech thieves. It does not include a traditional keyfob, which has an LED indicator, so it's inaccessible.
There will be occasions where you have to disable Autowatch Ghost 2's automatic security, for example during the valet parking or service work. The ghost CAN immobiliser has a dedicated mode for this, referred to as "Service Mode which can be activated with just a push of an app on your phone. The car can still be operated, but its maximum speed will be limited to 36mph for added security.
If you'd like more information about the TASSA accredited ghost immobiliser, call us today to arrange a demonstration at our workshop. A member of the team will run through a full breakdown of the process and will provide you with owner manuals, installation certification, Ghost 2 emergency card and security assurance.
Simple Change of PIN Code
Ghost is a next generation device that protects your vehicle without cutting wires or installing aftermarket key fobs. It is directly connected to the vehicle's CAN data network, and a personalised PIN code is programmed into it using buttons on your steering wheel and dash. The device does not emit RF signals, so it cannot be bypassed. This makes it undetectable by sophisticated scans using RF or code-grabbing techniques that modern thieves employ.
The PIN code can be altered to lock out previous drivers or even include an override code if you forget the sequence. The installer will guide you through the procedure to accomplish this during installation. The system comes with a valet-mode feature that can be used to temporarily disable pin input sequences so that your mechanic or garage can service the vehicle without having to know the pin number. This is ideal for customers who wish to surrender their car to valet parking or service but don't want divulge the pin sequence.
ghost 2 immobiliser fitting near me is an individual system that utilizes the buttons on your vehicle to create an unique and interchangeable PIN sequence. This sequence is entered through the app on your smartphone. There are no additional LED indicators are used, and your car is protected without possibility of being disabled.
Tested for each vehicle
In contrast to key fobs that require you to press buttons the ghost immobiliser is hidden under the dash or steering wheel so that you don't even know it's there. The device is connected to your car's CAN data networks and the personalised PIN code is programmed using buttons that are already present on your vehicle. The system stops your engine from starting unless the code is entered first. This means that thieves are unable to clone your car's existing keys or gain access to the OBD port to gain access to your vehicle.
Ghost can be used in all vehicles, including electric cars motorhomes, vans, motorhomes and bicycles. It's also extremely versatile and can be set to disable under different circumstances. It is possible to program it to go into Valet mode, for instance when the vehicle is transported to a valet company or parking company.