Repairs to uPVC Windows
uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not rot or rust like aluminum or timber.
Regularly cleaning and lubricating UPVC windows and doors is crucial. This will save you from unnecessary repair costs and also improve energy efficiency.
1. Broken Glass
The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is essential to take the time to make sure that you're doing everything you can to keep your windows in good shape.
Single-pane windows are relatively simple to replace and typically fit into frames of the past easily. However If you have double-pane windows that are held in place by internal beading it will be more difficult to take out the old panes and put in new ones. In this case, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.
Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor which could cause them to be trampled under.
Once the glass is removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional can come out and fix the window. This also serves as an obstacle to stop intruders from getting into your home. If the gap is large, you might want to consider using the security door with an integrated window as it will provide the best of both worlds.
2. Sagging
uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they can suffer from a variety of issues like sagging. A sagging window in uPVC can cause issues with light, draughts, and even security. It's important to take action as soon as you notice your uPVC windows are sagging.
Repositioning the hinges can help fix a window that is sagging. To accomplish this, you'll need to open the window so that you can get to the frame. After that, using the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close the window and test it for fitting. If you're satisfied with the fit, tighten the screws to ensure they stay in place.
If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loose their elasticity. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.
uPVC handles could also become loose. Often, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need to close the window and perform a test fitting. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle and return the mechanism to its original position.
3. Water Leaks
If you're waking up to damp floors and mouldy walls each time it rains it's crucial to take action. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also undermine your efforts to regulate the temperature within your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame has been damaged or missing.
It is a fairly easy fix and should be undertaken by any skilled DIYer. Based on the severity of the problem the caulking used previously may require removal before a fresh layer is applied. It is crucial to keep in mind that when it is about
uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area harder to clean and can reduce the efficiency of your energy.
Check that any drainage holes have no debris inside them and that the sill pan is angled correctly to drain away from the window. In more extreme cases, you may need to replace the window.
Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the
window repairs near me. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.
It is also important to note that if the leakage is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be corrected by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or are loose and blow open with ease it could be the hinges that are at the fault. Any competent DIYer can replace these in a matter of minutes.
Nearly every home in the UK will have top-hung or side-hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. Changing a window hinge is essentially a very simple process, but it's easier to do if you have someone to assist in holding the frame up.
It is also important to verify that the uPVC hinges are opening and closed in the correct direction. This can be done by checking for the arrows on each hinge, this shows which way the window should open.
The issue could be caused either due to opening the
window repair in the wrong way or by a poor installation at the factory. This issue can be fixed by sending us a picture on our website. We will be happy to give you suggestions.
It is also essential to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window open and close more easily. It can also reduce the possibility of a window sticking and prevent corrosion. It is recommended to perform this every year. WD40 or other solvent-based oils are not recommended as they can cause damage to your
upvc window repairs near me windows.
5. Draughts
Draughts can be caused by different things. The hinges can also be misaligned due to wear, causing gaps between the frame and sash. This can be easily repaired by giving them a good clean, but when they're beyond repair, it could be necessary to have them realigned or replaced. Secondly the interlock, this is located on the hinge of the window and can also be misaligned, and again it is possible to give them a good clean, but in some cases it might be necessary to get them replaced.
The next common cause of draughts is the window seals. They are susceptible to being worn out or damaged over time, and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping is a good way to stop draughts. Another option is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also reduce the risk of draughts.
Another method of reducing the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking out cold air.
With a little maintenance and repair, your upvc windows will provide excellent security and insulation for your home. It is essential to remember that all windows eventually get worn out and it may be more cost-effective to simply replace them than to repair them.