How to Change a Subaru spare key (
147.47.238.227)
Call a locksmith if you lose your
Subaru key. Locksmiths can usually cut you a key cheaper than the dealer.
Subaru car keys are generally either intelligent "push-to-start" fob remote keys or basic metal keys. The Fob key comes with an embedded chip that must be reprogrammed.
Keyless Entry System
A key fob allows you to lock or unlock your Subaru from a distance. You can also open the trunk or lift gate of your vehicle. These remotes are connected to an inside keypad to connect with your computer system of your vehicle.
Subaru models have a little known feature dubbed PIN Code Access. You can utilize a personalized number sequence to open and start your vehicle. If you own a more recent Subaru Forester, Outback, Crosstrek, WRX, WRX STI or Impreza that comes with this feature, refer to your owner's manual to see how to utilize it.
It's likely that the battery inside the key fob is dying. The first thing you'll need to check is that the key fob has new batteries, and you can do this by using a portable remote tester or a basic multimeter that you can find in your home garage.
The next step is to remove the key fob from its case and look at the circuit board that controls the transmitter. The board will contain one or two sets of eight-digit numbers, so jot down the first set so you are able to recall it later. After you've completed this, you can start programming the key fob at home. The process for doing this differs based on the make and year of your car but it's generally simple enough to complete yourself.
Key Fobs
Subaru's latest models come with key fobs that not only unlock doors and activate your lights, lock the gas cap, and start your vehicle. This last feature is particularly useful if you've encountered yourself at the gas station and your car wouldn't even start because the battery in the key fob has gone out.
It's likely that your Subaru's key fob, whether it's old or new, can be easily replaced. Remember that some of the most modern models, with their high level technology, may require an appointment with the dealer. With little effort and some time, you can build your own key fob replacement.
Start by examining the circuit board that controls the transmitter on your key fob (instructions for opening the case must be included in your owner's manual). There should be two or more serial numbers of 8 numbers each. Keep the first set of numbers in your wallet for later for reference.
Then, get into your driver's seat and close all doors. Turn the key to start your vehicle, then turn off after 10 turns. Press the lock button on the key fob, then open the door to verify that all doors work correctly. Close the door, and then take the key off. You should hear your vehicle beep again, indicating that the key fob is programmed.
Ignition System
The key battery could be dead If your
subaru outback key fob keys don't work as they should. If you know
how to replace lost subaru key, you could replace the battery of your key fob yourself. The replacement battery is inexpensive and easy to locate. If the key fob isn't responding to your commands It could be a different problem. To get a spare key, you should visit a dealer. They will guarantee that the key is genuine
subaru legacy replacement key cost key that's under warranty and will be programmed to your vehicle. This is far safer and easier than buying an aftermarket key from a business on the internet.
The dealer will also cut a key for you if you provide them with your VIN number as well as evidence of ownership. They'll use this information to code the replacement key to ensure that it will be accepted by the immobilizer. This procedure is more complicated than cutting a new key, and the dealership will usually charge more for this service.
Once the new key has been programmed, it is possible to switch it to your existing key. It will take only five seconds to insert the new key, so be sure to keep your working key at hand. You can take the key off after the security light has stopped flashing and you can test it.
Battery Replacement
One of the key features that make
subaru key fob upgrade fobs so useful is their ability to turn on your car's power windows and sunroof with a single touch of a button. However, the battery that is in the Subaru key fob was not meant to last forever. It will eventually need to be replaced. Fortunately, changing the battery is a straightforward procedure that you can do yourself with the help of this short guide from Capitol Subaru.
First, you'll need to locate the tiny crevice that is the gap between the front and back of your keyfob. Utilizing a small flathead screwdriver, you can pop this seam wide to reveal a small compartment inside which is the battery. Take out the old battery and then insert a new one, making sure that it is facing the correct side upwards. After you have put everything together you can use the new key fob to lock or unlocking your vehicle.
It's always recommended to have an extra set of keys available, especially if you've lost them or they're not functioning properly. A new key can be bought at your local dealership for cars or you can get one made by an locksmith. It's important that your key fob functions well as soon as possible so that you can drive safely.