Repairs to uPVC Windows
uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they do not rust or rot.
Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help prevent costly repairs and improve energy efficiency.
1. Broken Glass
If the glass in your window is broken it can cause a huge amount of damage to your home, making it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good condition.
For single pane windows, it is relatively easy to replace them, and the new window is usually able to fit into the old frame very easily. If you have
double glazed window repairs-paned windows which are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance you'll need locate some plastic spacers that aid the new pane in being able to fit properly into the window frame.
If you plan attempt to remove the window panes yourself it is crucial to wear the proper safety gear, including thick gloves and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor and could be trampled under.
Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block water and drafts from getting into the home until a professional comes out and fix the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is large, you may be interested in the security door with an integrated window, since it will provide the best of both worlds.
2. Sagging
Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a variety of issues that include sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It is crucial to act when you discover that your uPVC windows are sliding.
Repositioning the hinges could help fix a window that is sliding. To accomplish this, you'll need to open the window so that you can access the frame. With a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and verify the an appropriate fit. If you're happy with the fit, tighten the screws to ensure they stay in the right place.
If you are unable to move the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes them to lose tightness. If this happens, it's important to replace the seal as fast as possible so that your uPVC windows are watertight and safe from drafts.
uPVC handles may also become loose. This is typically caused by screws that have loosened over time, but it can be caused by the handle mechanism wears out. It's relatively easy to repair a loose uPVC handle. You'll first need to close the window and perform an experiment fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.
3. Water Leaks
It is essential to take action if you awake each day to discover mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is damaged or not present.
It is a fairly easy fix and should be undertaken by any DIY expert. Based on the severity of the problem the old caulking might need to be removed before a new layer is applied. It is crucial to remember that when it comes to upvc window repairs (
tempaste.com) you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could reduce your energy efficiency.
Verify that the drainage holes are free of debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious instances, you might need to consider replacing the window.
Mold spots and rotted sills are also signs of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.
It is also important to remember that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
Hinges may be to blame when your uPVC window is difficult to open or if it blows open with a breeze. They can be repaired by any DIYer who is skilled and are usually done within a few minutes.
Most households in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is easier to do when you have a person to help you hold the frame in place.
It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.
Faulty window hinges could be the result of incorrectly opening the window in a certain way or by improper installation in the factory. Sending us a picture through our website can often resolve the problem. We are always happy to provide assistance.
Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant on the hinges is a good method of doing this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the chance of windows getting stuck and stop corrosion. This should be done at least every year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.
5. Draughts
Draughts in Upvc windows can be caused by a few various factors. The hinges can also become disaligned as a result of wear, causing an opening between the frame and sash. These can be easily repaired by giving them a good cleaning, but if they are beyond repair it could be necessary to get them aligned or replaced. The interlock, which is on the hinge side of the window, may also be misaligned, and again it may be possible to just give them a good clean, but in certain cases, it may be necessary to have these replaced.
The seals may wear out or become damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures, and also reduce the risk of draughts.
The last way to reduce drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. These will keep your home warm by blocking out cold air.
The windows made of upvc can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. However, it is important to realize that all windows have a life span and eventually, they will reach the point when it's more economical to replace them than fix them.