How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct set of steps to add a second key. It requires dealer assistance using the handheld computer known as Tech-2. Then a new key as well as transponder must be purchased and then programmed into the car.
Make sure to rotate your keys in order to prevent one from wearing out faster than the next. This will keep your keys in perfect condition.
Replacement Case
The new key fobs aren't like the older Saab keys. They have electronics that make it difficult to duplicate. This has made car theft considerably more difficult than it was years ago. But, it has also made the replacement of lost keys a much more expensive undertaking.
Saab 9-3 owners should have two keys working. It's expensive to replace a lost key because it requires replacing the CIM module, and programming the locking cylinders. Dealers charge between $100-$200 for this.
There are ways to cut down on these high costs. Some parts dealers can look up the code on an extra key (usually the same one that opens the doors and turns on the ignition) and cut a new metal key blade at just a fraction of dealer cost. The key must, however, be the same as the original one in order to function in your car.
Follow these steps to replace the case. You'll need an open-faced screwdriver and patience. With the screwdriver, break apart the plastic, and then take off the emergency key. Once the case is open, take the electronics out and put them back into your new case. Put the correct key and badge inside the case.
Replacement Battery
The replacement battery for the Saab 9-3 is an inexpensive component that can be replaced quickly and easily. This DIY video from YouTube Cyclone Cyd shows how to replace the remote key fob battery in just four steps. This tutorial should work for any modern
saab key fob, however the procedure might differ slightly.
The first step is to find the button that opens the backup key in the fob. This button is usually on the back of the fob close to the
saab replacement keys Logo. Use a flathead to insert the screwdriver into the tiny hole on this button. This should be sufficient to let the fob case open so that you can replace the battery.
After you have installed the new CR1632 batteries, you can restore the remote key fob. You can then program it into your car. The entire process should not exceed an hour. It's a simple procedure that doesn't require any special equipment.
The process is more complex if you lose your key, but it's possible. The dealer will need to find the VIN number of the car and then order a new key blade and TWICE module that has the exact unique code. The dealer will then have to program the key using MDI, a brand new software tool.
Replacement Key Fob
The key fob has a battery that is used to lock and unlock your car. The batteries last for a certain time, and they will eventually fail. This is a problem that occurs with all vehicles and the good thing is that you can replace the batteries in many key fobs without replacing the entire case. You can purchase fobs replacements on Amazon that come with all the electronics already in place, so you'll just pop open the case and replace those batteries that are old. It's important to note that you'll need remove the emergency key first. you can do this by inserting the small screwdriver flathead into the slot in the middle of the case. Use the screwdriver to move around the case until it will split open, making it simple to take it out.
If you're looking to replace your keys, have a spare available. This will save you a significant amount of money. If you have an extra key, request the dealer to cut the key and program it for your car. This is less expensive than purchasing a brand new key fob.
If you do not have a spare key, it is possible to add another key to your car, however this requires a lot research and effort. It costs a few hundred dollars to get an additional car key. The computer in the vehicle must also be programmed. This can be done by a professional, however it's a costly option for most owners.
Replacement Ignition
The current
saab key replacement near me 9-3 is an advanced alarm system built on a keycode. This means that if you lose your only working key, acquiring another key can be extremely expensive because the car needs to have a special computer module added and it also must be specially programmed to accept an additional key. Dealers can charge hundreds of dollars to program an additional key if they are unable to do it.
Dealers will charge you a high price to replace your car computer (also called the CIM or saab 9-3 key replacement [
cellbagel3.werite.net] twice) when you lose your only working key. Instead, we can reprogram the EEPROM in your current car computer to make it ready for a new key, slashing over 50% of the price you spend at a dealer.
If you've owned a
saab fob key replacement 9-3 many years, you know that the ignition keys are not very durable. They can be extremely sticky, and the buttons are known to be removed from them occasionally, so you should consider purchasing a new one if yours isn't working properly. It's not as difficult as it appears to replace the ignition key. With the appropriate tools, it could be accomplished in a matter of minutes.