How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have to follow a series of steps that are unique to add a second ignition key. It requires dealer service with a handheld computer dubbed Tech-2. Then the transponder is replaced and a key have to be purchased.
Rotate your keys to stop one from wearing out quicker than the next. This will also ensure that your keys remain in top shape.
Replacement Case
The new key fobs aren't like the older Saab keys. They have electronics that make it difficult to copy. This has made car theft a lot more complicated than it was 20 years ago. It has also made it more expensive to replace lost saab key -
Witty-gnu-fknkbl.mystrikingly.com - keys.
Every owner of a Saab 9-3 needs to have at least two functioning keys. It is costly to replace a lost key, as it requires replacing the CIM module, and changing the locking cylinders. Dealers will typically charge $100-$200 for this.
There are options to avoid these high costs. Some parts dealers will use the code of the spare key to cut a brand new metal blade for a fraction of what the dealer charges. The key must, however, be the same as the original one to function properly within your car.
Follow these steps to replace the case. You'll need an flathead screwdriver and patience. With the screwdriver, you can pry apart the plastic and remove the emergency key. Once the case is open, take the electronics out and put them back into your new case. Make sure you insert the correct key and badge back inside the case, too.
Replacement Battery
The Saab 9-3 replacement battery is an inexpensive component that can be easily and quickly replaced. This YouTube video from Cyclone Cyd shows how to replace the remote fob battery in just four easy steps. This tutorial should work with any modern Saab key fob. However, the process could differ slightly.
The button is typically located just below the Saab logo on the back of the fob. This button is usually located close to the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver into the tiny hole in this button. This will be enough to allow you to open the fob's case so that you can replace the battery.
Once the new CR1632 battery is installed, you can reassemble the remote key fob and then program it to your car. The whole process should not exceed an hour. This is a very easy procedure that doesn't require special tools.
The process can be a bit more complicated if you've lost your key, but still possible. The dealer has to determine the VIN of the car and then order a replacement key blade and TWICE module that has the correct unique code. After that, they will need to cut the replacement key and then program it using a new software tool called MDI.
Replacement Key Fob
The key fob has a battery that is used to lock and unlock your car. Batteries are able to last for a short time and will eventually fail. This is a frequent issue that affects all cars. The good news is you can replace the battery on most key fobs, and not have to replace the entire case. You can purchase replacement fobs on Amazon that have all the electronics already installed, so you can just pop open the case and replace the old batteries. It is important to keep in mind that you'll need to remove the emergency key first, and you can do this by putting the screwdriver of a small flathead into the slot found in the middle of the case. The case will split as you work the screwdriver all around it.
If you're about to replace the keys, ensure you have a spare as this will reduce the total cost by a substantial amount. If you have a spare you can ask the dealer to cut the new key and program it into your car, which is cheaper than replacing the entire key fob.
It is possible to add another key to your vehicle if you don't already have one, but it takes some research and work. A second key can cost around a hundred dollars and it also requires programming of the car's computer. Professionals can accomplish this but it's not a cheap option.
Replacement Ignition
As opposed to the earlier Saab vehicles, the latest SAAB 9-3 models feature an advanced alarm system that is dependent on a coded keys. This means that when you lose your sole working key, adding an additional one could be extremely costly since the car needs to have a computer module installed and it must also be programmed to accept an extra key. Dealers can charge hundreds of dollars to program an entirely new key, even if they're unable to do it.
If you've lost the only working key, a dealer will replace your car's computer (known as the CIM or
saab key programming near me TWICE) to create a replacement, and they will charge you the highest price for it. Instead, we can reprogram the EEPROM of your current car computer to allow it to be programmed to accept a second key, and save you over 50% of what you'll have to pay at a dealership.
If you've been a faithful owner of an 03-11 SAAB 9-3, you likely have noticed that the ignition switch isn't very durable. They can be extremely sticky and the buttons are known to be removed from them from time to time It is recommended that you consider replacing your ignition key if it isn't working as it should. It's not as difficult as you think to replace the ignition key. With the right tools, it is able to be accomplished quickly.